View unanswered posts | View active topics It is currently Tue Oct 22, 2019 7:12 am



Reply to topic  [ 22 posts ]  Go to page 1, 2, 3  Next
In what state do you want your Puma board sent? 
Author Message
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15340
Location: Home sweet home!
This is a thread to see who wants what mailed to them.

Options are:

  1. bare board
  2. CPU + min required to program it
  3. All SMD parts

Prices with shipping yet to be determined.

Option 1 was specced at $21us inclusive of p&p.
Option 2 is approx $75us for a bare basic programmed board ($22 mcu + few passives to load SM + PCB + labor + p&p).
Option 3 will likely be around $200us - $250us, but don't quote us on this, Marcos doesn't want to provide this service(fair enough, hard core only, remember), so you'll have to find someone to do this for you, maybe Jean in sufficient quantity.

There is no guarantee that Marcos (or others) will be willing to do this work for you. The original thread was specced as for hardcore only... I meant it! If you're lucky though, and scared of it, or cheap/stingy, you may ask nicely and get some of the harder work done for you.

Even if you get the All SMD option, you still need to provide and install the through hole components and figure out a connector, case, loom, future mods requiers as we figure them out, etc. Fix them if you blow it up, etc.

Comments and questions: viewtopic.php?f=38&t=1016

Post here to spec your order only! Other posts will be removed.

List of people/specs:

5 Marcos - Argentina - no info required, do as you please :-)
5 Abe - California/San Diego
2 Fred - New Zealand/Auckland - 1 x option 1, 1 x option 3 - I will do the through hole.
2 Seank - Arizona/Phoenix
1 Craig - New Zealand/Auckland
1 Joseph Davis - North Carolina - option 1
1 johntramp - New Zealand/Christchurch
1 Quan-Time - Australia/Adelaide
2 flyrdm - ?
1 em_knaps - New Zealand/Auckland
1 mops - New Zealand/Auckland
1 yoshifab - California/San Diego
1 Nick S - California/San Diego
1 phr34kr - New Zealand/Auckland - option 1
2 Karri - Finland!
1 jbelanger - Canada
1 dirtydsi - ?
1 colza - New Zealand/Napier - prefers option 2, can live with option 1
1 Motofab - California/South of LA somewhere before Mexico.
1 Gimpy - Nebraska - option 2
1 gearhead - usa - option 1
1 mtxman - New York/Rochester
2 cavehamster - ?
1 f1erce

Keen for a spare if available:

Hentai
DCramer
dealwithit
AldoQ - option 1

Spares:

Marcos 0 - 2
Abe 0 - 3
mtxman 1
Jean 0 - 1 - option 1

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Wed Jan 12, 2011 7:39 am
Profile WWW
TO220 - Visibile

Joined: Sun Dec 26, 2010 10:44 am
Posts: 4
Option 1 at this stage. Cheers.


Wed Jan 12, 2011 8:20 am
Profile
TO220 - Visibile

Joined: Sun Dec 26, 2010 11:57 pm
Posts: 7
Option 2 if possible.

Otherwise I can work with option 1 if I have to.


Wed Jan 12, 2011 8:21 am
Profile
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
Hi
if a spare is available: option 1
best regards


Wed Jan 12, 2011 12:17 pm
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Sat Feb 23, 2008 8:58 pm
Posts: 387
If my board is not needed as a spare, option 1.


Wed Jan 12, 2011 2:16 pm
Profile WWW
QFP80 - Contributor

Joined: Tue Dec 23, 2008 12:56 pm
Posts: 31
Put me down for option #2 please.
Gimpy


Thu Jan 13, 2011 11:55 am
Profile
LQFP112 - Up with the play

Joined: Sun Feb 03, 2008 9:30 pm
Posts: 120
Location: Chicago, USA
I have a chip, and a BDM, so I think I can make do.

Make mine option 1.

My location is Chicago, USA.

Gearhead


Thu Jan 13, 2011 3:08 pm
Profile
DIP8 - Involved

Joined: Fri Dec 24, 2010 5:04 pm
Posts: 19
Option 1, please.


Fri Jan 14, 2011 7:56 am
Profile
QFP80 - Contributor
User avatar

Joined: Fri Jan 14, 2011 11:03 pm
Posts: 74
Location: Auckland New Zealand
Option 3 please
Throw it in with Father Freds.


Fri Jan 14, 2011 11:04 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15340
Location: Home sweet home!
Prices updated to reflect reality of shipping costs and time spent etc. Argy post wont allow normal post, so tracked post is the only way to roll. With paypal fee, 5 buck board, and that, its 21usd each.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sat Jan 15, 2011 8:52 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 22 posts ]  Go to page 1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.