FreeEMS revision A version 1 first edition PCB feeler

For organising group buys of automotive and electronic equipment and parts.
comrade904
TO220 - Visibile
Posts: 13
Joined: Mon Sep 15, 2008 3:53 am

Re: FreeEMS revision A version 1 first edition PCB feeler

Post by comrade904 »

depending on price and features I may want a few cars worth.

88' Porsche 924s 4<-4cyl
92' Alfa romeo <-V6cyl 60degree
90' Nissan 240<-4cyl
XX' Gm series II L67 <-V6cyl 90degree
99' Miata <-4cyl

maybe few lawnmower engines worth too, but we'll see a little latter.
WTDeuce
QFP80 - Contributor
Posts: 40
Joined: Thu Sep 04, 2008 1:54 pm

Re: FreeEMS revision A version 1 first edition PCB feeler

Post by WTDeuce »

  1. On board IGBT ignition drivers - Preferred but can handle them being in the same case (I dont want multiple boxes)
  2. On board low Z injector drivers - Must for me, I dont want to replace my brand new Racetronix 120lb injectors and resistors are a turn off and generally suck overall IMHO
  3. Thermistor self heating prevention :-p
  4. NO thermistor self heating prevention
  5. Current feedback circuitry on injectors - Probably yes
  6. NO current feedback circuitry on injectors
  7. ONLY SMD components - Slightly opposed since some SMD look like a bitch to solder but ive never tried so I dont know first hand
  8. ONLY TH components - Neutral
  9. SMD components supported - Neutral to positive, I can handle some SMD
  10. TH components supported - Neutral, I like TH but they do make for a bigger board
  11. X primary fuel channels required/preferred - Require 4 Low Z
  12. X ignition channels required/preferred - Require 2 (wasted spark), 4 would be great for future "just in case"
  13. X auxiliary low current low side drives preferred and required OnOff / PWM - Boost control!!! Water injection solenoid control would be nice, probably two so that there can be an IC sprayer. Water inj/IC sprayer can be general outputs though
  14. X auxiliary high current low side drives preferred and required OnOff / PWM - Nothing jumps to mind beyond a way to control a pump for water injection, so probably 10-15 amps for a Shurflo... A low current relay output would be ok here as well
  15. How many boards? - Ill probably buy 2
Id also really like a knock input, I am about to buy a Link Knockblock so onboard filtering isnt a must now, just a 5 volt input. Also, 2x hall inputs (60-2 wheel with hall sensor, and a hall cam trigger).
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: FreeEMS revision A version 1 first edition PCB feeler

Post by Fred »

DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply