In what state do you want your Puma board sent?
Re: In what state do you want your Puma board sent?
Prefer option 2, but can do option 1. Shipping to Aussieland.
Re: In what state do you want your Puma board sent?
Hey guys,
If a board becomes available that's option #2 then let me know.
Fred you know where to find me
Preston
If a board becomes available that's option #2 then let me know.
Fred you know where to find me

Preston
-
- DIP8 - Involved
- Posts: 18
- Joined: Sat Sep 18, 2010 1:32 pm
- Location: Orangeville, Ontario, Canada
Re: In what state do you want your Puma board sent?
I'll take option 1
- nitrousnrg
- LQFP144 - On Top Of The Game
- Posts: 468
- Joined: Tue Jun 24, 2008 5:31 pm
Re: In what state do you want your Puma board sent?
Hey, I'm changing the rules for option 2:
To check freeems-vanilla is running ok, I also have to install the FT232, USB connector, and both 5v regulators. That would be $75, and is pretty much the same you get with the TA board, without RS232,485 and CAN, but with built-in USB.
For those who really want only the SM loaded, I can load it without installing the USB-related stuff, but I see some weird behavior with that, and I can't be sure if the thing is working correctly. That would be $60, but don't ask for guarantees :-)
Btw, shipping cost is $8
To check freeems-vanilla is running ok, I also have to install the FT232, USB connector, and both 5v regulators. That would be $75, and is pretty much the same you get with the TA board, without RS232,485 and CAN, but with built-in USB.
For those who really want only the SM loaded, I can load it without installing the USB-related stuff, but I see some weird behavior with that, and I can't be sure if the thing is working correctly. That would be $60, but don't ask for guarantees :-)
Btw, shipping cost is $8
Marcos
Re: In what state do you want your Puma board sent?
This would be fine by me,a pm when ready?nitrousnrg wrote:Hey, I'm changing the rules for option 2:
To check freeems-vanilla is running ok, I also have to install the FT232, USB connector, and both 5v regulators. That would be $75, and is pretty much the same you get with the TA board, without RS232,485 and CAN, but with built-in USB.
Btw, shipping cost is $8
Gimpy
Re: In what state do you want your Puma board sent?
PM Marcos your address (I already have it) and he'll send you paypal details and once done with his exams get it out to you :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
- nitrousnrg
- LQFP144 - On Top Of The Game
- Posts: 468
- Joined: Tue Jun 24, 2008 5:31 pm
Re: In what state do you want your Puma board sent?
Now i have a more accurate idea about shipping:
1 bare board: $8 (it looks like a letter)
2 bare board: didn't try, but may look as a letter too.
More than 2 bare boards, or option 2 boards: $15, shipped in a box
1 bare board: $8 (it looks like a letter)
2 bare board: didn't try, but may look as a letter too.
More than 2 bare boards, or option 2 boards: $15, shipped in a box
Marcos
Re: In what state do you want your Puma board sent?
Option #1 for me please!
-
- TO92 - Vaguely active
- Posts: 3
- Joined: Sat Aug 13, 2011 10:30 pm
- Location: Russia, Saint-Petersburg
Re: In what state do you want your Puma board sent?
I am interested in option 2
Re: In what state do you want your Puma board sent?
Just for the record, this is long since over. Marcos says that future spins will have very limited closed production runs (by him at least) so Puma is likely out until further notice unless you DIY the entire thing. Also, there is a cheap (50usd) BDM available from TA (and from other sources for cheaper too) which make a blank PCB more reasonable.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!