DIYEFI.org Forum

This is a thread to see who wants what mailed to them.

Options are:

1. bare board
2. CPU + min required to program it
3. All SMD parts

Prices with shipping yet to be determined.

Option 1 was specced at $21us inclusive of p&p.
Option 2 is approx $75us for a bare basic programmed board ($22 mcu + few passives to load SM + PCB + labor + p&p).
Option 3 will likely be around $200us - $250us, but don't quote us on this, Marcos doesn't want to provide this service(fair enough, hard core only, remember), so you'll have to find someone to do this for you, maybe Jean in sufficient quantity.

There is no guarantee that Marcos (or others) will be willing to do this work for you. The original thread was specced as for hardcore only... I meant it! If you're lucky though, and scared of it, or cheap/stingy, you may ask nicely and get some of the harder work done for you.

Even if you get the All SMD option, you still need to provide and install the through hole components and figure out a connector, case, loom, future mods requiers as we figure them out, etc. Fix them if you blow it up, etc.

Comments and questions: viewtopic.php?f=38&t=1016

Post here to spec your order only! Other posts will be removed.

List of people/specs:

5 Marcos - Argentina - no info required, do as you please :-)
5 Abe - California/San Diego
2 Fred - New Zealand/Auckland - 1 x option 1, 1 x option 3 - I will do the through hole.
2 Seank - Arizona/Phoenix
1 Craig - New Zealand/Auckland
1 Joseph Davis - North Carolina - option 1
1 johntramp - New Zealand/Christchurch
1 Quan-Time - Australia/Adelaide
2 flyrdm - ?
1 em_knaps - New Zealand/Auckland
1 mops - New Zealand/Auckland
1 yoshifab - California/San Diego
1 Nick S - California/San Diego
1 phr34kr - New Zealand/Auckland - option 1
2 Karri - Finland!
1 jbelanger - Canada
1 dirtydsi - ?
1 colza - New Zealand/Napier - prefers option 2, can live with option 1
1 Motofab - California/South of LA somewhere before Mexico.
1 Gimpy - Nebraska - option 2
1 gearhead - usa - option 1
1 mtxman - New York/Rochester
2 cavehamster - ?
1 f1erce

Keen for a spare if available:

Hentai
DCramer
dealwithit
AldoQ - option 1

Spares:

Marcos 0 - 2
Abe 0 - 3
mtxman 1
Jean 0 - 1 - option 1

Option 1 at this stage. Cheers.

Option 2 if possible.

Otherwise I can work with option 1 if I have to.

Hi
if a spare is available: option 1
best regards

If my board is not needed as a spare, option 1.

Put me down for option #2 please.
Gimpy

I have a chip, and a BDM, so I think I can make do.

Make mine option 1.

My location is Chicago, USA.

Gearhead

Option 1, please.

Option 3 please
Throw it in with Father Freds.

Prices updated to reflect reality of shipping costs and time spent etc. Argy post wont allow normal post, so tracked post is the only way to roll. With paypal fee, 5 buck board, and that, its 21usd each.