Puma board (spin 1)
Re: Puma board (spin 1)
Nope, you'd probably be the first from there, I would say. Most honda guys aren't overly interested because OEM tuning options for hondas are so strong. In any case, glad to have you on. Simon/Uterus is off os.co.nz, he's a GC :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Puma board (spin 1)
Yes, hook me up, 1 for me please!!
Gimpy
Gimpy
-
- LQFP112 - Up with the play
- Posts: 120
- Joined: Sun Feb 03, 2008 9:30 pm
- Location: Chicago, USA
Re: Puma board (spin 1)
Holy smokes! It is 12/27. Can I still get in for one?
I am in the US.
Gearhead
I am in the US.
Gearhead
Re: Puma board (spin 1)
At this point, or some time in the near future, I think we should either have a bet or at least a forum poll about what happens with this first spin. I know many folks claim it takes three spins to get a layout done. A poll/bet might be based on these potential problems.
Nothing wrong, it works just fine.
It goes up in flames when powered for the first time.
It needs minor (pcb/trace) rework on sub circuits, but basically works.
Sub circuits work, but could use some additional optimization.
One sub circuit fails catastrophically, resulting in nitrousnrg loosing an eye, or finger.
Everything works well, except Fred is right and we have to change the MCU pin out.
Our files appear fine, but there is some kind of MFG problem that requires significant new work.
I always feel like it's the first option, but the options that follow it still seem to happen.
Nothing wrong, it works just fine.
It goes up in flames when powered for the first time.
It needs minor (pcb/trace) rework on sub circuits, but basically works.
Sub circuits work, but could use some additional optimization.
One sub circuit fails catastrophically, resulting in nitrousnrg loosing an eye, or finger.
Everything works well, except Fred is right and we have to change the MCU pin out.
Our files appear fine, but there is some kind of MFG problem that requires significant new work.
I always feel like it's the first option, but the options that follow it still seem to happen.
Re: Puma board (spin 1)
LOL @ that! I have another option to add, but the poll is a good idea, and pretty thorough, let me put it up.jharvey wrote:One sub circuit fails catastrophically, resulting in nitrousnrg loosing an eye, or finger.
viewtopic.php?f=9&t=985 Vote here! :-)
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Puma board (spin 1)
mtxman is IN! :-) Added! 34 and I think everyone that I want to have one is in, so Marcos, the ball is in your court now, mate! :-)
Fred.
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
- nitrousnrg
- LQFP144 - On Top Of The Game
- Posts: 468
- Joined: Tue Jun 24, 2008 5:31 pm
Re: Puma board (spin 1)
Perfect!
b-day now, but I'll put leds to crank/cam inputs and 12v when I'm back. DRC, and some extra vias for better thermal dissipation.
The guys should answer tomorrow, if everything is ok I pay. It will be time to put some effort on the BDM and finish the oven.
And LOL, just expect a few burns from the soldering
b-day now, but I'll put leds to crank/cam inputs and 12v when I'm back. DRC, and some extra vias for better thermal dissipation.
The guys should answer tomorrow, if everything is ok I pay. It will be time to put some effort on the BDM and finish the oven.
And LOL, just expect a few burns from the soldering
Marcos
Re: Puma board (spin 1)
Yo deseo Ceci un muy feliz cumpleanos, amigo! Pasala esta en a ella! Gracias! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Puma board (spin 1)
OK, I just sent out a last chance email to 25 forum members that have been active in the past or are OG! 3 bounced immediately lol... maybe a few more will make it on time.
We need a scheme for those coming later to get them from early birds that changed their mind. I'm sure there will be some of each. Marcos' timing for an order is about as bad as possible and through some hard work, we've still come up with good interest in it. Very positive for future iterations if this one goes well.
If you change your mind, you've still gotta at least pay for the board, or find someone else to buy it.
If you come late, post here, someone might want to pull out.
Fred.
We need a scheme for those coming later to get them from early birds that changed their mind. I'm sure there will be some of each. Marcos' timing for an order is about as bad as possible and through some hard work, we've still come up with good interest in it. Very positive for future iterations if this one goes well.
If you change your mind, you've still gotta at least pay for the board, or find someone else to buy it.
If you come late, post here, someone might want to pull out.
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Puma board (spin 1)
Thanks for the heads up Fred.
I'm down for two, just let me know how to get whoever money.
Been busy with other vehicle projects, I gotta get back on this to get the bike ready for race season
I'm down for two, just let me know how to get whoever money.
Been busy with other vehicle projects, I gotta get back on this to get the bike ready for race season