View unanswered posts | View active topics It is currently Thu Oct 19, 2017 9:09 pm



Reply to topic  [ 8 posts ] 
Dan's Scoreboard Project 
Author Message
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
Hi guys,

Well I have my frames made (light timber frame with uv/outdoor rated material on outside) see pic below

Image

Overall dimensions are approx 1200mm x 1000mm x 70mm

I have my 550mm tall seven segment digits and led matrix arrays from scrolling text also (pics to come)

Probably using an ATMEL AVR microcontroller for this project, and due to having a bucket load of spare io, I will probably drive the transistors directly for each segment and multiplexed digit control lines.

Segments have around a 23.5V drop so I am using a 24V power supply for them and I will probably let each segment have approx 100mA, more testing required there though.

More to come!

Dan


Sat Mar 02, 2013 4:00 am
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
I fired up a segment to test it out. They are common anode, which is perfect for how my driver circuitry works.

The segment in the below (crap quality) image is being driven at half the supply voltage and current I intend to use, so should be quite bright and nice when driven correctly.

The GPO's in the background should give you a fair indication of the size of the segment :-)

Image


Mon Mar 25, 2013 9:22 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14823
Location: Home sweet home!
I think it must be broken; I can only count 6.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Mon Mar 25, 2013 12:48 pm
Profile WWW
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
Led matrix panels finally arrived!

Image

I have also completed my ATMEL AVR based controller PCB :-)

Image

More to come in the next few days!

:-)


Wed Mar 27, 2013 10:12 am
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
Link - http://au.element14.com/lprs/cor-rx3-aau/rf-module-receiver-rssi-4-channel/dp/2096235?ref=lookahead

Preliminary mock-up of digit's, antenna's and associated components prior to the painting of the frames.

Image

EDIT: links to radio gear removed, as the initial gear I intended to use was crap and I have migrated to newer, better and more reliable equipment :-)


Last edited by Dan on Tue Jun 04, 2013 12:14 pm, edited 1 time in total.



Wed Apr 03, 2013 2:27 am
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
Tonight's mounting progress!

EDIT: excuse the crap quality image :-P

Image


Tue Apr 09, 2013 2:14 pm
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
The scoreboards are being setup at the local soccer club this coming weekend!

One unit is completed! See below crap quality image. This photo was taken before I had neatened up the wiring as I was testing out the firmware (the scrolling text motion makes the pixels look funny, but trust me, they aren't) :-P

Image

I ended up using these excellent 151Mhz radio modules manufactured by Elsema (you need to click on the 151Mhz tab to see the ones I am using)

--> http://www.elsema.com/prod-datamodules.htm

I also designed another board for the remote control unit (note: these photo's were taken before flux was removed)

Image

Image

and I used this enclosure from Hammond Mfg for the remote control unit

--> http://www.hammondmfg.com/1553T.htm

I initially had issues with how I packetised my data (ie, lack of adequate error rejection/detection), but I implemented a HLDC protocol for packetising my payload and it now works very nicely!

More pics to come once they are installed at the club!

Happy days! :-)

Dan


Tue Jun 04, 2013 12:25 pm
Profile
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Mar 02, 2010 2:33 pm
Posts: 1201
Location: Australia
Big developments here. Reminder for me to put new pics up.

Done a few and also a large led video screen also.


Mon Aug 08, 2016 4:07 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.