I started on it! Got them off the SD card. Started deleting unrelated stuff. Need to keep going and then select some of the 200 to show. Can't upload all of them :-/
Some neat videos, too. Might need a new yt channel for that. Unsure what to do with those.
Reflow Fred Style! :-)
Re: Reflow Fred Style! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
Code: Select all
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5$ l good.pics/|wc
104 929 5884
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5$ l good.vids/|wc
17 146 957
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5$ l shit.pics/|wc
304 2729 17284
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5$ l shit.vids/|wc
23 200 1312
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5$ l shit.means.not.toaster
-rw-r--r-- 1 fred fred 0 May 17 18:27 shit.means.not.toaster
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- LQFP112 - Up with the play
- Posts: 119
- Joined: Sat Apr 24, 2010 1:42 am
- Location: New Zealand
Re: Reflow Fred Style! :-)
Fred wrote:If I don't, bug me to death...
Re: Reflow Fred Style! :-)
LOL! Nice. OK ok... when I stop playing around with tuning apps I'll do it. I had them all open and was choosing when my machine went down yesterday. Now I don't have my preferred terminal :-(
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
My contribution, NZ-only, this one is extra-rare being a giant weta as found only on Little Barrier island. Photographed by my ex Linds while she was out there counting rare stuff like tuataras and strange birds and other lizards etc.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
Wouldn't ya know it: Not only is my terminal not working, eog my image viewer isn't either. For LOLs:
So I pulled up a copy of xv that I built years ago on another box, installed a few libs and it runs fine. Old school FTW!
http://www.trilon.com/xv/
http://gregroelofs.com/greg_xv.html
Enough said.
Code: Select all
fred@cheetah:~/toaster.and.logic.sniffer/toaster.5/good.pics/smaller.1280$ eog *eog: malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
Aborted
http://www.trilon.com/xv/
http://gregroelofs.com/greg_xv.html
Enough said.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
WARNING: This post, those prior, and those to follow, likely contain extremely bad humour. You've been warned.
OK, this post is going to contain the physical mods to the oven, steel, alloy, insulation,
general humour, and other mischief. Click the images for a bigger version (1280x1024).
As some of my more loyal followers may remember, I went shopping for sheet steel, sheet
alloy and insulation one night. I failed. Instead, I bought a cheap cordless drill. Woops.
As I walked home with my head, quite literally, hanging low, disappointed, disheveled,
beaten, broken, and deeply unhappy, I stumbled upon and old VCR on the street.
It smelled like a damp room. Or maybe a damp towel. Certainly not good. It lived outside,
between the windows and the sunshade blind thingies for a few days. Once I cracked it
open, I found a wonderful surprise inside, lucky me!
I knew as soon as I saw the surprise that this VCR was indeed a winner (II) an destined
to go on to bigger and better things.
It was about that time that I also came to know that I may not be such a winner and
may need a little help, so I got myself prepared with some tools of the trade, so to speak.
And some actual tools, too. And supplies, of course...
I cut some of the glass fibre insulation to fit the shape of the recess in the back panel
intending to fit it vaguely inside that and skin internally using the winner (II) VCR steel.
So I marked my steel and began to cut it using the hacksaw.
However progress was so slow that I felt the need to take multiple photographs of it.
It, and my creative engineering due to a lack of appropriate tools....
In the end, though, persistence triumphed, a lot like this project, really.
Though not at all like the acer monitor cardboard box that I'd used as a work support...
The final piece looked the part, and fitted where it needed to, too, so I figured that
I hadn't done a bad job... just a piss poor one.
After all of that cutting had given me a sore arm I decided to do something more leisurely
for a while and fitted the ceramic tape claimed to work to 1350C. More on that later...
All so pretty and white, what could possibly go wrong? https://www.youtube.com/watch?v=LxD44HO8dNQ
Nothing, right? So I went ahead and installed the glass and the double skin for the back.
To be continued...
Fred.
OK, this post is going to contain the physical mods to the oven, steel, alloy, insulation,
general humour, and other mischief. Click the images for a bigger version (1280x1024).
As some of my more loyal followers may remember, I went shopping for sheet steel, sheet
alloy and insulation one night. I failed. Instead, I bought a cheap cordless drill. Woops.
As I walked home with my head, quite literally, hanging low, disappointed, disheveled,
beaten, broken, and deeply unhappy, I stumbled upon and old VCR on the street.
It smelled like a damp room. Or maybe a damp towel. Certainly not good. It lived outside,
between the windows and the sunshade blind thingies for a few days. Once I cracked it
open, I found a wonderful surprise inside, lucky me!
I knew as soon as I saw the surprise that this VCR was indeed a winner (II) an destined
to go on to bigger and better things.
It was about that time that I also came to know that I may not be such a winner and
may need a little help, so I got myself prepared with some tools of the trade, so to speak.
And some actual tools, too. And supplies, of course...
I cut some of the glass fibre insulation to fit the shape of the recess in the back panel
intending to fit it vaguely inside that and skin internally using the winner (II) VCR steel.
So I marked my steel and began to cut it using the hacksaw.
However progress was so slow that I felt the need to take multiple photographs of it.
It, and my creative engineering due to a lack of appropriate tools....
In the end, though, persistence triumphed, a lot like this project, really.
Though not at all like the acer monitor cardboard box that I'd used as a work support...
The final piece looked the part, and fitted where it needed to, too, so I figured that
I hadn't done a bad job... just a piss poor one.
After all of that cutting had given me a sore arm I decided to do something more leisurely
for a while and fitted the ceramic tape claimed to work to 1350C. More on that later...
All so pretty and white, what could possibly go wrong? https://www.youtube.com/watch?v=LxD44HO8dNQ
Nothing, right? So I went ahead and installed the glass and the double skin for the back.
To be continued...
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
Everything seemed to be going swimmingly, so I thought I'd test it, right here, on my desk, middle
of the room, middle of winter, windows closed, computer a foot away, eee even closer, no problem... :-/
Well, not much of a problem... really... ? :-/
/me opens all 3 windows as wide as they'll go and hopes it clears before his mrs comes home at 8pm or so...
1350C they said... turns out that the bonding agent and other stuff in there burns off around 250/300
Right where I was peaking... woops. There was an additional issue, too, I forgot/ignored the paint on the VCR
steel. The smoke was mostly from the insulation, but the VCR paint stuff f***ing STUNK to high hell! Not nice.
Aftermath:
To be continued...
Fred.
of the room, middle of winter, windows closed, computer a foot away, eee even closer, no problem... :-/
Well, not much of a problem... really... ? :-/
/me opens all 3 windows as wide as they'll go and hopes it clears before his mrs comes home at 8pm or so...
1350C they said... turns out that the bonding agent and other stuff in there burns off around 250/300
Right where I was peaking... woops. There was an additional issue, too, I forgot/ignored the paint on the VCR
steel. The smoke was mostly from the insulation, but the VCR paint stuff f***ing STUNK to high hell! Not nice.
Aftermath:
To be continued...
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Reflow Fred Style! :-)
Not one to be deterred, I did some research, realised that it needed some heat
to clear it up, and gave it another shot, but in the still-dirty-from-last-night's-fryup
kitchen, with the fan on, instead!
The results proved my theory and solidified my research!
...and gave me a new idea...
Note the white bits are where it was most hot...
Excuse the greasy mess, it's usually kept fairly clean, I swear...
Which gave me another idea... how do you strip paint? Heat, right? :-/
Worked a treat! :-)
I double insulated the top, as with just the ceramic, it was still getting pretty toasty (ha ha ha).
To be continued...
Fred.
to clear it up, and gave it another shot, but in the still-dirty-from-last-night's-fryup
kitchen, with the fan on, instead!
The results proved my theory and solidified my research!
...and gave me a new idea...
Note the white bits are where it was most hot...
Excuse the greasy mess, it's usually kept fairly clean, I swear...
Which gave me another idea... how do you strip paint? Heat, right? :-/
Worked a treat! :-)
I double insulated the top, as with just the ceramic, it was still getting pretty toasty (ha ha ha).
To be continued...
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!