Hall current sensor
Posted: Sun Feb 20, 2011 9:59 am
I'm not quite sure where to put this. So I'll put it here, I guess. It's a low cost AC/DC current clamp that plugs into a normal DVM. It can read down to a couple mA and up to 60A of either AC or DC current. So a perfect scale for automotive applications. The bandwidth is good for something like 50khz, so you can also connect it to a scope and use it a current sensor.
http://www.veejer.com/testequipment.html
http://www.veejer.com/testequipment.html