View unanswered posts | View active topics It is currently Wed Aug 15, 2018 12:57 am



Reply to topic  [ 2 posts ] 
Mercedes w124 coupe 300ce Start :) 
Author Message
TO220 - Visibile

Joined: Mon Apr 14, 2014 4:52 pm
Posts: 5
Hello everyone!
I want to run my car on freeems :)
But I need some advice.
Poorly know English so I use the google translator - I'm sorry and ask for your understanding.

I want to run in this configuration:
6 cylinder engine - in sequence.
Wasted spark ignition
I guess I need 2x vr - 36-1 wheel and cam
I need a table switching 1xpb and 1xlpg and 2x ingnition pb / lpg.
I have 6 injectors PB 16ohm and 6 injectors LPG 2ohms (or insert P & H works with your processor?)
TPS Bosh 3 pin
MAP sensor
Air temperature sensor and water
tacho output
This is the first phase of my installation.
No one before had hid it in the MS3 but burned down.

In the next assembly step turbo.
So there is the boost control

It would be nice to be able to chip correction for the second dose of fuel maps after VE LPG temperature and pressure on the terminal injection.
That extra came to Map sensor and system of TEMPERATURE.

I have it at home or as part slice msv3 connecting the processor your input temperature map sensor, o2, tacho output will it work?


Thu Jul 24, 2014 8:00 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15181
Location: Home sweet home!
Kuba81 wrote:
I want to run my car on freeems :)

This is a good start! The desire has to be strong because the hurdles are high :-) Tolerance of less-than-desired feature set is mandatory.

Quote:
Poorly know English so I use the google translator - I'm sorry and ask for your understanding.

Not a problem at all. Maybe dual post everything in your native tongue too so we can have twice the chance to see what you meant? I have some Polish friends who may be able to help. One is even a M$ user here in NZ.

Quote:
I want to run in this configuration:
6 cylinder engine - in sequence.
Wasted spark ignition

Not possible at the moment, but you'll find the car runs well on semi-sequential injection anyway. In many ways it's superior, believe it or not. See this: viewtopic.php?f=54&t=1084

Quote:
I guess I need 2x vr - 36-1 wheel and cam

The cam will be ignored for the time being. Support will be added later, but not for a while. No point on > 4 cylinders at the moment anyway.

Quote:
I need a table switching 1xpb and 1xlpg and 2x ingnition pb / lpg.
I have 6 injectors PB 16ohm and 6 injectors LPG 2ohms (or insert P & H works with your processor?)

That's not going to happen for a while, so you'll have to choose one mode, or create some sort of physical switch setup and reload your tune as required.


Quote:
TPS Bosh 3 pin
MAP sensor
Air temperature sensor and water

Easy.

Quote:
tacho output

This just depends on your requirements. There is support for various types. You'll need to connect appropriate hardware to the pin in question, though. Or simply run diodes from coil negative sides.

Quote:
No one before had hid it in the MS3 but burned down.

A fitting ending for a shitty product! :-D

Quote:
In the next assembly step turbo.
So there is the boost control

I've got a boosted vehicle that will need some boost control too, so this will get developed once it's up and running again.

Quote:
It would be nice to be able to chip correction for the second dose of fuel maps after VE LPG temperature and pressure on the terminal injection.
That extra came to Map sensor and system of TEMPERATURE.

This makes no sense. Please post it in Polish.

Quote:
I have it at home or as part slice msv3 connecting the processor your input temperature map sensor, o2, tacho output will it work?

Ditto, post this in Polish.

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sat Jul 26, 2014 9:13 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: Baidu [Spider] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.