Hello thought I would post something to the user's rides section. I'm a user in the capacity that I selfishly use the community here for great information, but hope to contribute one day.
I plan to freeEms the carburated dizzy engine on my 1985 Toyota pickup.
But this is the current condition, so I'm staying inside building a USBDM
USBDM, my first ever hand etch, and first ever SMD soldering. BTW Thank you DueceEFI.
edit fixed a pic
Impregacy's 1985 Toyota Hilux 22R
Re: Impregacy's 1985 Toyota Hilux 22R
Neat, good on you for DIYing it! :-)
As for your 22R, how do you plan to set it up? Crank wheel? Dizzy mods? COP? Wasted spark? Dizzy?
As for your 22R, how do you plan to set it up? Crank wheel? Dizzy mods? COP? Wasted spark? Dizzy?
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Impregacy's 1985 Toyota Hilux 22R
Well I think first and foremost we need to loose the distributor. I'm thinking the logic level GM LS1 COPs, since I hear they are good and I have some laying around. For crank position I'm open to suggestions. If the decoder for 36-1 is stable to like 6000 rpm, I was thinking it would be smart to buy one of those wheels from diy autotune. I have a Ford VR sensor I could use with it. Beyond this I would only need a MAP sensor correct?
Later I might acquire a 22RE intake manifold and add batch injection.
Later I might acquire a 22RE intake manifold and add batch injection.
Re: Impregacy's 1985 Toyota Hilux 22R
LS coils are good, and mostly, they're convenient. With a crank wheel you will be firing them twice as often as normal, but that's OK too. I'd still recommend a robust driver to push 5V out to them, in the style of Jaguar/RavAGE.
Beware of DIYAutoTune wheels, some of them are SHIT. Also, the wheel you use should match your VR sensor tooth size wise.
Sensor wise, you need:
RPM, MAP, IAT, CHT, and you'll definitely want TPS and WB02
For ignition only you can get away with RPM + MAP as I currently do on the hotel.
+1 to the staged approach, ignition first, fuel injection later. By batch I hope you mean semi-sequential.
Fred.
Beware of DIYAutoTune wheels, some of them are SHIT. Also, the wheel you use should match your VR sensor tooth size wise.
Sensor wise, you need:
RPM, MAP, IAT, CHT, and you'll definitely want TPS and WB02
For ignition only you can get away with RPM + MAP as I currently do on the hotel.
+1 to the staged approach, ignition first, fuel injection later. By batch I hope you mean semi-sequential.
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Impregacy's 1985 Toyota Hilux 22R
Is that the 4Y 2.2 motor?
Re: Impregacy's 1985 Toyota Hilux 22R
Thank you Fred. Yes I was thinking to try MAP + RPM to do ignition. What would you recommend in terms of toothed wheel and sensor combo?
Ancient, this truck has the 22R http://en.wikipedia.org/wiki/Toyota_R_engine#22R
Well in a moment of true genious I soldered the USB connector onto the wrong side of my USBDM (backwards). Plugged it in and it shut down my computer. Computer rebooted OK Does anyone know for sure if the IC's were fried by this?
Ancient, this truck has the 22R http://en.wikipedia.org/wiki/Toyota_R_engine#22R
Well in a moment of true genious I soldered the USB connector onto the wrong side of my USBDM (backwards). Plugged it in and it shut down my computer. Computer rebooted OK Does anyone know for sure if the IC's were fried by this?
Re: Impregacy's 1985 Toyota Hilux 22R
No particular recommendations, but you should match the dimensions of the original. Gutted about the BDM, I have no idea if it's fried or not. Good luck!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Impregacy's 1985 Toyota Hilux 22R
Looks like the BDM may be okay. Soldered a USB connector on the right way and the eee picks up something freescale.
I guess the next step is to prepare a win32 machine to load initial stuff to the BDM.
Should I start with the Jaguar 0.6 board as the basis? I thnk I am ready to build a FreeEMS, and I have a little free time at the moment!
I guess the next step is to prepare a win32 machine to load initial stuff to the BDM.
Should I start with the Jaguar 0.6 board as the basis? I thnk I am ready to build a FreeEMS, and I have a little free time at the moment!
Re: Impregacy's 1985 Toyota Hilux 22R
Good news on the BDM! I would use Linux to do the loading via BDM. It's been reliable for me once I got it working at all. On the EEE I have a script to make it work. It adjusts the virtual view port so the window is created big enough. Otherwise you can't get to the buttons on the thing...
What is your intention re hardware? Print an existing design? TA + circuits? Do your own design? I can advise after I know what you are intending to do.
What is your intention re hardware? Print an existing design? TA + circuits? Do your own design? I can advise after I know what you are intending to do.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 74
- Joined: Fri Jan 14, 2011 11:03 pm
- Location: Auckland New Zealand
- Contact:
Re: Impregacy's 1985 Toyota Hilux 22R
Hooray! More utes
Are those prelude seats?
(Oh and everything else is also cool)
Are those prelude seats?
(Oh and everything else is also cool)