DIYEFI.org Forum
http://forum.diyefi.org/

ruzki´s Megane Coupe 2.0 16V F7R and Turbo
http://forum.diyefi.org/viewtopic.php?f=3&t=2380
Page 3 of 3

Author:  ruzki [ Wed May 28, 2014 11:50 am ]
Post subject:  Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo

managed to get a "real" 60-2 trigger wheel.
i made a test bench for the trigger wheels so i can turn them with a drill or by hand.

Image

Image

Image

I got perfect sync with the "real" 60-2 Trigger wheel .. it sync´s already at 40 rpm ... this is really good compared to the M$ wich sync´s at 120 rpm.

So now i´m 100% sure that hardware config and the values in "fixed config 2" are right !

With the 60+1.5-1.5 wheel i have Sync Loss Reason 64 at event 57
As i think this has to be the tooth # 58 .. it is simply to long

Tried to figure out wich part of the code is responsible for this issue .. but for me the code is very hard to understand :?

Attachments:
IMG_2856.jpg
IMG_2856.jpg [ 117.45 KiB | Viewed 1937 times ]
IMG_2854.JPG
IMG_2854.JPG [ 127.37 KiB | Viewed 1937 times ]
IMG_2852.JPG
IMG_2852.JPG [ 205.34 KiB | Viewed 1937 times ]

Author:  ruzki [ Wed May 28, 2014 4:39 pm ]
Post subject:  Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo

Had an typo !

CAR is running now !!! :lol:

Fred get me on that List !! :D

Video will follow !!!

Author:  Fred [ Wed May 28, 2014 7:31 pm ]
Post subject:  Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo

You get yourself on the list man! Post away! :-D 31st place, congratulations! viewforum.php?f=55

Apologies for difficult-to-understand missing tooth code! It's one of the more complicated pieces of code in the firmware. There is a full write up on it here, though, if it helps: viewtopic.php?f=56&t=1340

First in Germany, too! Nice. Will update various threads when you have posted your thread with video in the section linked above.

BTW, please keep your RPM down to about 2500 for the time being. I'll try to get this fixed ASAP if you're planning to actually use/drive the car on this setup.

This uses the little board that I have on my desk, right? :-)

Fred.

Author:  Fred [ Thu May 29, 2014 7:23 am ]
Post subject:  Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo

Please push the change so I can see what the typo was? :-)

Author:  Fred [ Sun Sep 04, 2016 10:50 am ]
Post subject:  Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo

I apologise for not paying enough attention to the details in this thread! You spelled it all out for me and I either didn't understand, or didn't pay enough attention. I feel a bit ashamed. I'm working on a solution for you, but there is no ETA on that. :-( Wish I'd realised sooner!

Page 3 of 3 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/