managed to get a "real" 60-2 trigger wheel.
i made a test bench for the trigger wheels so i can turn them with a drill or by hand.
I got perfect sync with the "real" 60-2 Trigger wheel .. it sync´s already at 40 rpm ... this is really good compared to the M$ wich sync´s at 120 rpm.
So now i´m 100% sure that hardware config and the values in "fixed config 2" are right !
With the 60+1.5-1.5 wheel i have Sync Loss Reason 64 at event 57
As i think this has to be the tooth # 58 .. it is simply to long
Tried to figure out wich part of the code is responsible for this issue .. but for me the code is very hard to understand
ruzki´s Megane Coupe 2.0 16V F7R and Turbo
Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo
Had an typo !
CAR is running now !!!
Fred get me on that List !!
Video will follow !!!
CAR is running now !!!
Fred get me on that List !!
Video will follow !!!
Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo
You get yourself on the list man! Post away! :-D 31st place, congratulations! viewforum.php?f=55
Apologies for difficult-to-understand missing tooth code! It's one of the more complicated pieces of code in the firmware. There is a full write up on it here, though, if it helps: viewtopic.php?f=56&t=1340
First in Germany, too! Nice. Will update various threads when you have posted your thread with video in the section linked above.
BTW, please keep your RPM down to about 2500 for the time being. I'll try to get this fixed ASAP if you're planning to actually use/drive the car on this setup.
This uses the little board that I have on my desk, right? :-)
Fred.
Apologies for difficult-to-understand missing tooth code! It's one of the more complicated pieces of code in the firmware. There is a full write up on it here, though, if it helps: viewtopic.php?f=56&t=1340
First in Germany, too! Nice. Will update various threads when you have posted your thread with video in the section linked above.
BTW, please keep your RPM down to about 2500 for the time being. I'll try to get this fixed ASAP if you're planning to actually use/drive the car on this setup.
This uses the little board that I have on my desk, right? :-)
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo
Please push the change so I can see what the typo was? :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: ruzki´s Megane Coupe 2.0 16V F7R and Turbo
I apologise for not paying enough attention to the details in this thread! You spelled it all out for me and I either didn't understand, or didn't pay enough attention. I feel a bit ashamed. I'm working on a solution for you, but there is no ETA on that. :-( Wish I'd realised sooner!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!