1994 Rev3 Toyota 3sgte

Post your project vehicles here! One thread per vehicle please.
Post Reply
Michael20
TO220 - Visibile
Posts: 10
Joined: Wed Jun 19, 2013 7:11 am

1994 Rev3 Toyota 3sgte

Post by Michael20 »

Hello,

yet i'm running a Link G3, and wanted to switch to some "free" EMS, and then found FreeEMS :)
Think could extract most sensor calibrations from the Link G3.

Few Facts i know about the engine System:
-Denso CAS VR Sensor
-Yet running Distributor, wanted later COP best with full seq.
-Yet running on Map/Butterfly sensor
-on stock EMS running Injector full seq., on the Link G3 not

Would run it with E85, to get better temp, more boost 8-)

So i think, i need the Jaguar Option #2 +3/4Injector Drivers.
-Is there option for 3 extra Ingnition Drivers?
-Need i extra hardware for the Denso CAS 24-2 "VR" Sensor, there is a Articel about this system search for ("MS2-Extra 24 Toothed Distributor Manual")? Is the FreeEMS yet able to read this sensor?


Greetings Michael
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 1994 Rev3 Toyota 3sgte

Post by Fred »

A Jaguar suits any 4 cylinder engine very nicely, there are 4 ignition drivers and 11 FET outputs for relays, injectors and solenoids.

There is nothing special about the Denso 24/2 dissy, it is supported by both Jaguar and the firmware.

You can have your sequential + dizzy, or sequential + wasted spark (recommended) with FreeEMS at this time, and later, you can have COP + Sequential too.

E85 really requires a special sensor and a new piece of code, so I wouldn't recommend it for the time being. The reason is that the 85 in E85 is a lie, it should be called Eupto85 instead ;-)

Fred.

PS, the section you posted in is reserved for members of the exclusive FreeEMS owners club ;-) Hence I moved your thread here. Please add some photos of your car and/or engine to this thread to stir up some comments :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Michael20
TO220 - Visibile
Posts: 10
Joined: Wed Jun 19, 2013 7:11 am

Re: 1994 Rev3 Toyota 3sgte

Post by Michael20 »

Here it is :)
Technical Upgrade:
-3" complete Exhaust System
-upgradet intercooler
-540ccm Injectors
-Innovate WB

Think would go this route sequential Injection + dizzy first, and then COP wasted to delete the old dizzy system and get stronger ingnition 8-)

What do you mean with Eupto85, no don't want to drive flex fuel sensor yet. And yes i know that there could be some differences from gas station to gas station :roll:
So i think i need additional 3 ignitor drivers to option #2 Jaguar, and thats it. Or is there something i did overlook?

Engine Picture coming soon :D

EDIT: How much Input, analog are there?
Attachments
IMG_20120719_184923~01ohneNS.jpg
IMG_20120501_204808ohneNS.jpg
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 1994 Rev3 Toyota 3sgte

Post by Fred »

E85 varies from E50 to E85 randomly. It can't be trusted to be one fuel.

Why do you think you need 7 ignition drivers? :-/

Seq + dizzy is OK for starts, then swap to wasted spark.

Analogue inputs are up to 16 or 24 depending on hardware, but only a few are used at the moment.

That second photo is really nice :-)

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Michael20
TO220 - Visibile
Posts: 10
Joined: Wed Jun 19, 2013 7:11 am

Re: 1994 Rev3 Toyota 3sgte

Post by Michael20 »

Oh okay, Option #2 #3 are on 0.4 and 0.6 Jaguar different, so thought would there is only 1ignition driver on stock ;)
That much Input, nice!
Yes extra stopped on a country road, to shoot it.

So here the engine, not the beautiful, but nice running. And the power for the time, 2Litre 1994 and 245Ps from Factory :twisted:
Attachments
engine.jpg
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 1994 Rev3 Toyota 3sgte

Post by Fred »

Ahh. 0.4-alpha and 0.6-alpha are the same in that they both have 4 ignitor drivers. Both can only be setup to have 2 or 4. Both (I think) have 2 wired up stock and require 2 jumpered in. I had no idea you were talking about the population/buy options. The board itself has 4. Check here for IO capability and ADC inputs: viewtopic.php?f=67&t=2212
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply