DIY EFI on Opel Corsa

Post your project vehicles here! One thread per vehicle please.
Post Reply
laminator
DIP8 - Involved
Posts: 17
Joined: Wed Feb 20, 2013 4:35 pm

DIY EFI on Opel Corsa

Post by laminator »

My last successful history was an Opel Corsa 2 generation with 1800cc engine 60-2 trigger wheel, VR sensor, this sensor was my nigthmare about two weeks, i did't find the correct LM1815 circuit, i tried almost every configuration, searching in MS forums i found the first step, 100k resistor addition, later i put one pot on 14 pin, and i found the correct resistor value.

The Corsa has turbo, and works very well, with DSM 450cc injectors :D
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: DIY EFI on Opel Corsa

Post by Fred »

Sounds fun!

But I only have this to say, so far:

:nopics:

And also this:

:novids:

:-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
laminator
DIP8 - Involved
Posts: 17
Joined: Wed Feb 20, 2013 4:35 pm

Re: DIY EFI on Opel Corsa

Post by laminator »

User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: DIY EFI on Opel Corsa

Post by Fred »

Sweet :-) How much is max duty on the 450ccs?
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
laminator
DIP8 - Involved
Posts: 17
Joined: Wed Feb 20, 2013 4:35 pm

Re: DIY EFI on Opel Corsa

Post by laminator »

Fred wrote:Sweet :-) How much is max duty on the 450ccs?
I don't really sure, about 65% on 8 psi at 6000 rpm
Post Reply