View unanswered posts | View active topics It is currently Thu Oct 19, 2017 1:06 am



Reply to topic  [ 308 posts ]  Go to page Previous  1 ... 27, 28, 29, 30, 31
2003 Toxic Tacoma 
Author Message
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Jan 03, 2012 8:37 pm
Posts: 431
Location: Baton Rouge, LA. USA
Apparently it's not considered family-friendly to drive a spindle out of its bearings after the kids have gone to sleep.

Another half inch and it'll be out. Guess that's on tomorrow's agenda. :(

Image

On the plus side, I noticed what felt like the equivalent of a CD-ROM motor with a bad spot when turning the chuck yesterday (and especially so after pounding it just now). Makes me feel less queasy about changing the bearings.

_________________
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)


Mon Aug 07, 2017 4:37 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14822
Location: Home sweet home!
ToxicGumbo wrote:
Apparently it's not considered family-friendly to drive a spindle out of its bearings after the kids have gone to sleep.

LOL

So, how much is it going to cost us for a recording, or even just a transcript, of that conversation???

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Mon Aug 07, 2017 12:00 pm
Profile WWW
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Jan 03, 2012 8:37 pm
Posts: 431
Location: Baton Rouge, LA. USA
It was quick and to the point. I (much) later removed the spindle, but it's still going to be a bear getting everything apart. The bearing need to be driven in by both the outer and inner rings in both the cylinder shown above and on the spindle so that no warping occurs.

I've had projects set aside to and fro for work this past week now that my littlest is in daycare, but not a thing happened. She came home with norovirus and it spread rapidly through the family. Much of this week was spent taking turns getting sick all over the place and then cleaning it up.

Everyone's back in shape, but still easing into normalcy. We knew the daycare would introduce illnesses through the baby, but this was a trial by fire.

_________________
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)


Thu Aug 24, 2017 6:35 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14822
Location: Home sweet home!
Damn, that explains your total absence! :-/ Hope your newly developed immunity serves you well and for a long time. XO

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Fri Aug 25, 2017 12:27 pm
Profile WWW
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Jan 03, 2012 8:37 pm
Posts: 431
Location: Baton Rouge, LA. USA
"Total absence" is correct. All of us have been home all week and it took days to even want to pick the phone up beyond moments of absolute necessity. Yesterday, after regaining her appetite in a huge way, the littlest tumbled, changed hands into mine, then promptly threw up the entire day's menu onto my chest. The eldest struggled to take a few bites of dinner and nearly added to the dinner table. So plans for people to return to active duty today fell apart. It's said that this can reappear after 2 weeks, so hopefully we're keeping it from traveling and then back to us.

Things I've been trying to do forever and hope to do soon:

1. Save up more money as fast as possible. Not much in the bank and that's a bad thing right now given hopeful opportunities.
2. Finish fixing up the drill
3. Finish re-installing my Pi for logging
4. Get back with Fred about running a beta app for a quick tune
5. Try actually getting some progress on a decoder as I'd love to contribute more and this seems like a good angle
6. Tighten the damn fuel filter on my truck, change the oil, and plug an oil pan seal leak
7. Build the CAN Bus Firewall I had PCBs and parts ordered for long ago
8. Build my digital dash display
9. Modify and move my garage shelving to allow a compressor to be added and powered
10. Get a Nexus 5 to experiment with UBports, formerly Ubuntu Touch. Related, I wish the TAILS team would port to ARM CPUs.

Those are the most pressing personal projects right now.

_________________
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)


Fri Aug 25, 2017 5:36 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14822
Location: Home sweet home!
Ugh, that sounds horrible. :-/

ToxicGumbo wrote:
5. Try actually getting some progress on a decoder as I'd love to contribute more and this seems like a good angle

Yippee! :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Fri Aug 25, 2017 11:24 pm
Profile WWW
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Jan 03, 2012 8:37 pm
Posts: 431
Location: Baton Rouge, LA. USA
Back at work, kids and wife at their respective places as well. Good to be back in action.

I had very small chunks of time this weekend, but was able to do a couple of interruptible labor-related things as opposed to sit-down-and-think.

One was to start prepping the JLR CAN bus firewall build I earlier bought the boards and parts for:

Image

The other was an unexpected Facebook Marketplace scramble. A 60 gallon single-piston/single-stage compressor went up for sale at $200 in a neighboring area. Would I like double-stage with three pistons? Sure, but this is vastly better than nothing in the garage and will finally allow me to put my blast cabinet and tools back to work. Glad this came out of family money as we have an irrigation system which needs yearly blowout.

Image

However...what wasn't mentioned:

Image

Apparently they had snapped the threaded quick-connect at some point...which pretty much means the unit is temporarily unusable and that it's been open to the elements for some unknown time, possibly the three years since it's last been used. That might be good or bad with the low humidity here and/or moisture that was in there. The tank's pretty old and has probably seen a lot of use.

The quick-connect remains are cemented in there and the metal is weirdly soft, so it's no wonder it snapped so easily. A friend suggested hacksawing down to the threads and imploding it, which is a decent idea, but it'll dump metal residue and chunks into the tank. Would at least be better with a vacuum hose held nearby and the drain unscrewed for airflow.

Alternatively, I can just buy a new hex cap, but I only have one wrench that comes close to that diameter and the cap doesn't budge, presumably torqued pretty tightly. I'm broke and am more likely to hacksaw with the hope that air filters will catch anything particulate.

_________________
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)


Mon Aug 28, 2017 4:16 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14822
Location: Home sweet home!
Drive it around on the corner of each face.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Aug 29, 2017 10:21 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 308 posts ]  Go to page Previous  1 ... 27, 28, 29, 30, 31

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.