This is a project i started about 6 years ago it pretty much done now (not much more i want to do to it yet) it is a hand build replica of a Countach the body cam from a place called Euro Works this was the first car they ever build it changed hands quite alot before i got it and the owner before me burnt it for insurance money and thats how i ended up with it.
This is what it looked like when i bought it.
It has a full tube chassis,air ride, willwood breaks front and rear 18x12 and 17x8 billet wheels everything on this car was built by me, the car had a fiero transaxle in it when i got it but i swapped all that out and built a new rear cradle and put a audi 5000s 5 speed trans in it , the motor is a 355 chevy with eagle rods scat crank Edelrock heads trw pistons and a knock off single plane intake i modded for the injectors i used a 1050 dominator and gutted it to use it as a throttle body added a TPS sensor and made the linkage 1:1, i built the turbo kit for it the turbos are twin 67mm and twin 50mm wastegates ( i think ,it been a while since i did this car i cant remember for sure or not) .
It has MS1 in it right now controlling fuel and ignition i dont drive it very much anymore im usually too busy to even start the thing but i just cant bring myself to sell it for some reason .
(please forgive the bad pics these are old pics of it.)
My Car.
Re: My Car.
Holy mother of the lord above :-) MEAN :-)
You my man, are quite the legend. Again, VERY nice work!
OK, that's it, you run the site, I'm off home LOL, I jest.
Very cool.
Fred.
You my man, are quite the legend. Again, VERY nice work!
OK, that's it, you run the site, I'm off home LOL, I jest.
Very cool.
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: My Car.
Thank you very much.
LOL Hey im a hardware man give me a welder a plasma cutter or a soldering iron and i will make you something when it come to the important part (code ) im lost i can read through it and get a understanding of it but thats about it.
LOL Hey im a hardware man give me a welder a plasma cutter or a soldering iron and i will make you something when it come to the important part (code ) im lost i can read through it and get a understanding of it but thats about it.
Re: My Car.
I just linked a friend to your threads, they said this :
And another :
Fred.
They are pretty talented themselves :-)he's probably the kind of guy auto manufacturers and race teams dream of but never find
And another :
We are all impressed! :-)that guy is good (is an understatement)
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: My Car.
Why thanks very much for the compliments .
If i can be of ANY assistance in this venture im here i will post pics of the adapt board once i get around to ordering it.
If i can be of ANY assistance in this venture im here i will post pics of the adapt board once i get around to ordering it.
-
- TO220 - Visibile
- Posts: 13
- Joined: Tue Jan 15, 2008 5:10 pm
- Location: FL
- Contact:
Re: My Car.
I wonder why you can't sell it
Andrew-
Sakura- 1991 Mazda Miata, Rat-rod styling, FE3N-T swap in progress
Sakura- 1991 Mazda Miata, Rat-rod styling, FE3N-T swap in progress
Re: My Car.
i like very much!
-
- LQFP112 - Up with the play
- Posts: 160
- Joined: Tue Apr 08, 2008 9:14 pm
Re: My Car.
That's real sharp! How much horsepower?
Those Audi transmissions always impress me with what they can handle. Does somebody make an off the shelf adapter/bellhousing or did you do something trick?
Nice work, now all you need to do is upgrade to real fuel injection
Those Audi transmissions always impress me with what they can handle. Does somebody make an off the shelf adapter/bellhousing or did you do something trick?
Nice work, now all you need to do is upgrade to real fuel injection