Wanted - Mercedes Intake Assy
Re: Wanted - Mercedes Intake Assy
I don't like the way you're signing your posts in this thread, Tony! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Wanted - Mercedes Intake Assy
Why's that Fred? Can't believe people can be polite? ;P
Tony, usually I'm very well equipped and your assumption would've almost been true.
In fact I've been looking for an AC(&DC) TIG welder these past days, but I haven't ordered one yet. But that also doesn't mean I'll be instantly good at welding aluminium
I'll have a look at the part once it arrives. I was looking at the picture but I can't quite imagine where the heater element should go...
Tony, usually I'm very well equipped and your assumption would've almost been true.
In fact I've been looking for an AC(&DC) TIG welder these past days, but I haven't ordered one yet. But that also doesn't mean I'll be instantly good at welding aluminium
I'll have a look at the part once it arrives. I was looking at the picture but I can't quite imagine where the heater element should go...
Re: Wanted - Mercedes Intake Assy
No, because I've become accustomed to him signing off "Huff" which I have some affection for <3
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Wanted - Mercedes Intake Assy
OK, I'll stay as "Huff"(2)
Stefan, I usually sign my posts "Huff" because when Fred and I worked together a couple of years ago, he said that I reminded him of his friend "Huff" (now deceased) I think mainly because I smoke.
But because you were using your "real" name during our correspondence, I thought that it would be polite to use my "real" name which I'm sure Fred was kidding me about. No worries!
I did find a bung (aluminum) on Ebay (shipped from China) but am considering buying a tap for this thread size provided of course that I can find a spot on the throttle body suitable for this purpose.
I want to post a picture of the spiral heater that we hope to use, but can't seem to figure out how to insert a jpg into my post.
Thank you,
Huff
Stefan, I usually sign my posts "Huff" because when Fred and I worked together a couple of years ago, he said that I reminded him of his friend "Huff" (now deceased) I think mainly because I smoke.
But because you were using your "real" name during our correspondence, I thought that it would be polite to use my "real" name which I'm sure Fred was kidding me about. No worries!
I did find a bung (aluminum) on Ebay (shipped from China) but am considering buying a tap for this thread size provided of course that I can find a spot on the throttle body suitable for this purpose.
I want to post a picture of the spiral heater that we hope to use, but can't seem to figure out how to insert a jpg into my post.
Thank you,
Huff
Re: Wanted - Mercedes Intake Assy
It was much more than that! You looked and sounded and acted similarly too. Almost uncanny. I miss both Huffs, though if I'm lucky, and you add a 'd' to the end of that last sentence, I may see one of them again some day.TonyS wrote:he said that I reminded him of his friend "Huff" (now deceased) I think mainly because I smoke.
Attach and inline it, or MUCH better: http://imgur.com/but can't seem to figure out how to insert a jpg into my post.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Wanted - Mercedes Intake Assy
Spiral Intake Air Heater -
It has a M22 x 1.5 thread and is about 65mm long from the seating plane (just above the threaded section) to the end of the spiral heating element.
It draws about 60A @ 12V.
Thanks,
Huff
It has a M22 x 1.5 thread and is about 65mm long from the seating plane (just above the threaded section) to the end of the spiral heating element.
It draws about 60A @ 12V.
Thanks,
Huff
Re: Wanted - Mercedes Intake Assy
Hey Tony, (I'll stick with that, thanks for clearing it up Fred)
the throttle body has arrived here today. Had (has) lots of carbon buildup, but I'll leave cleaning it up well to you.
Not sure if I make it to the post office today, but sure the package will leave tomorrow.
You might get away with a M22 thread directly in the throttle body and a spacer under the heating element. Inner diameter is (iirc) 62mm, plus 3mm or so wall thickness.. but that's all up to you, the package is closed already
I'll send you the paypal details via pm.
Greets,
Stefan
the throttle body has arrived here today. Had (has) lots of carbon buildup, but I'll leave cleaning it up well to you.
Not sure if I make it to the post office today, but sure the package will leave tomorrow.
You might get away with a M22 thread directly in the throttle body and a spacer under the heating element. Inner diameter is (iirc) 62mm, plus 3mm or so wall thickness.. but that's all up to you, the package is closed already
I'll send you the paypal details via pm.
Greets,
Stefan
Re: Wanted - Mercedes Intake Assy
Thank you very much Stefan for doing this for us.
Winter will soon be here and we are hoping that this will help keep the engine running smoothly after the glow plugs turn off.
As far as the carbon build-up, my son is the "black crap" parts cleaning expert as he needs to do this on almost every internal engine part that he has worked on for this vehicle.
I'll let you all know how it turns out.
Please PM with the PayPal details.
Thanks again!
Huff
Winter will soon be here and we are hoping that this will help keep the engine running smoothly after the glow plugs turn off.
As far as the carbon build-up, my son is the "black crap" parts cleaning expert as he needs to do this on almost every internal engine part that he has worked on for this vehicle.
I'll let you all know how it turns out.
Please PM with the PayPal details.
Thanks again!
Huff