0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

If you want to sell that old MegaSquirt or Link hardware, here's the place to try.
JaniM
QFP80 - Contributor
Posts: 35
Joined: Fri Feb 15, 2013 6:13 am
Location: Finland

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by JaniM »

One option is I can take one these dust 0.4 fully build version, if price would be reasonable.
Can take to bench testing and later put on one aircooled car possible which has Edis ignition and old own M$1 design board.
There was one rerouting and other changes are minor for comparing to for this new 0.6 version? That I looked fast.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by Fred »

I don't think there is much point to moving around old boards, mostly. Everyone should be aiming to use new boards. Old boards should be used by who bought them, or put on a shelf as a souvenir IMO.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
JaniM
QFP80 - Contributor
Posts: 35
Joined: Fri Feb 15, 2013 6:13 am
Location: Finland

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by JaniM »

That's true. I'll wait brand new version then 8-)
User avatar
walinsky
QFP80 - Contributor
Posts: 46
Joined: Sun Sep 30, 2012 1:29 am

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by walinsky »

Fred wrote:OK, so you want in on first 10 then, and are happy to take that risk? Or second batch only if first is good? Or third batch if second is bad? Or? :-) Will move you when I fully understand.
Please put me on top of the list of the batch that will be run after the first 10 have been tested.
I don't feel that comfortable with soldering for being a guinea pig - I'll be happy to take the risk of the batch that is spun following the first 10 boards.
Really do want to get started :geek:
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by Fred »

walinsky wrote:Please put me on top of the list of the batch that will be run after the first 10 have been tested.
Moved to main list, which I'll have to push you out of again if the first lot are rugged. Or the whole group can fund the wasted boards if there are issues. Or something.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by pishta »

Ooh order day! Who do I send the cash-ish too? paypal ok? I couldnt find the 0.6 BOM in the docs either... want to pre order the materials for build day.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by Fred »

When it's time to order, these things will be published in a new thread. BOM will be similar to 0.4 but different. You'll have to wait and see if you want an accurate one-shot order.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
DeuceEFI
LQFP144 - On Top Of The Game
Posts: 578
Joined: Thu Feb 25, 2010 3:57 am
Location: Gosport, IN USA
Contact:

Re: 0.6-alpha Batch Of 10 List, Second Batch/0.7 List Too

Post by DeuceEFI »

See viewtopic.php?p=38399#p38399 to order a Jaguar 0.7-alpha PCB/kit.
Post Reply