Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jaguar

If you want to sell that old MegaSquirt or Link hardware, here's the place to try.
Locked
User avatar
Matthijs
LQFP112 - Up with the play
Posts: 113
Joined: Fri Aug 16, 2013 9:40 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by Matthijs »

I guess that is the smartest thing to do :)
sturovo
TO92 - Vaguely active
Posts: 1
Joined: Tue Nov 20, 2012 6:20 pm

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by sturovo »

Greetings from Slovakia.
I am interested in getting a couple of boards for NA/NB MX5 use and would be happy to be considered for this or the next batch of boards.
Well done FreeEMS'ers! recent progress has been hugely impressive!
Michael20
TO220 - Visibile
Posts: 10
Joined: Wed Jun 19, 2013 7:11 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by Michael20 »

Are there 1 or 2 left? :) Should run my Toyota 3s-g(t)e or my Mazda
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by Fred »

None/all left because none created yet ;-)

Looks like Andy will be doing a batch of just 10 (1 for him, 1 for me, 8 for you lot) to verify the changes since 0.4 was spun. There have been quite a lot and we deem it too high a risk to make 30 odd without first checking.

Everyone should post again expressing their urgency of need otherwise the first 8 will be the ones to get/pay for the first cut.

It might be that there are no issues, and we immediately spin 30 more for everyone, or it may be that there are some tweaks and this thread is the feeler for 0.7 boards with those tweaks. I the tweaks are small and verifiable, then we'll feel comfortable running off more than a single lot without checking first.

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
Matthijs
LQFP112 - Up with the play
Posts: 113
Joined: Fri Aug 16, 2013 9:40 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by Matthijs »

I don't have any urgency at all so enlist me for the second batch then.
User avatar
walinsky
QFP80 - Contributor
Posts: 46
Joined: Sun Sep 30, 2012 1:29 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by walinsky »

No urgency here either. I'll wait for the second batch as well
Michael20
TO220 - Visibile
Posts: 10
Joined: Wed Jun 19, 2013 7:11 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by Michael20 »

I would one "yet", but smd soldered would be nice :)
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by pishta »

Did you get my "dibs" for an 0.6 pc board only? Not sure if i posted in the right link. Im in usa.
DanMoto
DIP8 - Involved
Posts: 21
Joined: Fri Aug 16, 2013 6:59 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by DanMoto »

No urgency here either. I will take one or two as they become available. I don't need anything except for the PCB.
mikehudsonuk
TO220 - Visibile
Posts: 8
Joined: Tue Sep 03, 2013 8:11 am

Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua

Post by mikehudsonuk »

Hello
I'd like to get hold of an SMD board from the first batch if possible..
Urgency is not massive, but I'm happy to take the "risk" of being one of the first 10.
Will be going in a mx5 destined for supercharging
Cheers
Mike
Locked