Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jaguar
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I guess that is the smartest thing to do
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Greetings from Slovakia.
I am interested in getting a couple of boards for NA/NB MX5 use and would be happy to be considered for this or the next batch of boards.
Well done FreeEMS'ers! recent progress has been hugely impressive!
I am interested in getting a couple of boards for NA/NB MX5 use and would be happy to be considered for this or the next batch of boards.
Well done FreeEMS'ers! recent progress has been hugely impressive!
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Are there 1 or 2 left? Should run my Toyota 3s-g(t)e or my Mazda
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
None/all left because none created yet ;-)
Looks like Andy will be doing a batch of just 10 (1 for him, 1 for me, 8 for you lot) to verify the changes since 0.4 was spun. There have been quite a lot and we deem it too high a risk to make 30 odd without first checking.
Everyone should post again expressing their urgency of need otherwise the first 8 will be the ones to get/pay for the first cut.
It might be that there are no issues, and we immediately spin 30 more for everyone, or it may be that there are some tweaks and this thread is the feeler for 0.7 boards with those tweaks. I the tweaks are small and verifiable, then we'll feel comfortable running off more than a single lot without checking first.
Fred.
Looks like Andy will be doing a batch of just 10 (1 for him, 1 for me, 8 for you lot) to verify the changes since 0.4 was spun. There have been quite a lot and we deem it too high a risk to make 30 odd without first checking.
Everyone should post again expressing their urgency of need otherwise the first 8 will be the ones to get/pay for the first cut.
It might be that there are no issues, and we immediately spin 30 more for everyone, or it may be that there are some tweaks and this thread is the feeler for 0.7 boards with those tweaks. I the tweaks are small and verifiable, then we'll feel comfortable running off more than a single lot without checking first.
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I don't have any urgency at all so enlist me for the second batch then.
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
No urgency here either. I'll wait for the second batch as well
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I would one "yet", but smd soldered would be nice
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Did you get my "dibs" for an 0.6 pc board only? Not sure if i posted in the right link. Im in usa.
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
No urgency here either. I will take one or two as they become available. I don't need anything except for the PCB.
-
- TO220 - Visibile
- Posts: 8
- Joined: Tue Sep 03, 2013 8:11 am
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Hello
I'd like to get hold of an SMD board from the first batch if possible..
Urgency is not massive, but I'm happy to take the "risk" of being one of the first 10.
Will be going in a mx5 destined for supercharging
Cheers
Mike
I'd like to get hold of an SMD board from the first batch if possible..
Urgency is not massive, but I'm happy to take the "risk" of being one of the first 10.
Will be going in a mx5 destined for supercharging
Cheers
Mike