I have two (2) remaining Jaguar A3 boards left, I can supply you with the following configuration for $82 USD each plus shipping from Indiana, USA:
Jaguar A3 PCB,
MCU with the Serial Monitor loaded,
MAX9926,
FTDI USB UART,
up to six (6) Injector drivers
both the Fuel Pump/Fan drivers.
This will be a functional MCU/all silicon components board with the capabilities of a TA board, including already having the Serial Monitor program loaded so you can use the Load/Run jumper. You will need to supply the passive components as found in my BOM at https://github.com/DeuceEFI/Jaguar/blob ... Jaguar.ods in order to use the board (you will need to supply the remainder of the components yourself).
Complete Jaguar FreeEMS forum section: viewforum.php?f=67
Supported Injection methods: viewtopic.php?f=67&t=1543
Supported Ignition systems: viewtopic.php?f=67&t=1541
Instructions on how to build the Jaguar A3 PCB: https://github.com/DeuceEFI/Jaguar-Assembly-Manual
And finally a link to videos of the Jaguar A3 board in action on a GM 3.1L V6: viewtopic.php?f=67&t=1627
[Edit 10-13-2012] Both Jaguar A3 boards have been sold and shipped, congratulations malcom2073 and ToxicGumbo!
FOR SALE: Jaguar A3 boards for FreeEMS [ALL SOLD! OBSOLETE!]
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
FOR SALE: Jaguar A3 boards for FreeEMS [ALL SOLD! OBSOLETE!]
Last edited by DeuceEFI on Sat Oct 13, 2012 8:12 pm, edited 1 time in total.
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
- ToxicGumbo
- LQFP144 - On Top Of The Game
- Posts: 474
- Joined: Tue Jan 03, 2012 8:37 pm
- Location: Manhattan, KS. USA
Re: FOR SALE: Jaguar A3 boards for FreeEMS
For reference, I've just contacted DeuceEFI for a board.
-Jeff
-Jeff
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: FOR SALE: Jaguar A3 boards for FreeEMS
So far masterkorp and ToxicGumbo have expressed interest in purchasing the 2 Jaguar A3 boards.
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
-
- LQFP112 - Up with the play
- Posts: 211
- Joined: Tue May 01, 2012 4:17 pm
- Location: Shrewsbury PA
- Contact:
Re: FOR SALE: Jaguar A3 boards for FreeEMS
If either of them decides not to take it, I'll take one.