Arrived today.
Thanks Andy!
Jaguar 0.7-alpha kits For Sale
-
- QFP80 - Contributor
- Posts: 34
- Joined: Sun Apr 14, 2013 8:50 am
- Location: Australia
Re: Jaguar 0.7-alpha kits For Sale
Steve
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
-
- QFP80 - Contributor
- Posts: 34
- Joined: Sun Apr 14, 2013 8:50 am
- Location: Australia
Re: Jaguar 0.7-alpha kits For Sale
Serial #33 donated to FreeEMS community
Steve
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
Re: Jaguar 0.7-alpha kits For Sale
I speak for at least myself and the person in possession of it when I say: Thank you very much! <3reanimotion wrote:Serial #33 donated to FreeEMS community
It could run an engine tomorrow, or if not, any day now, and an epic and infamous engine at that! :-D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Jaguar 0.7-alpha kits For Sale
Hi
i want 1 bare pcb and bdm
regrds
i want 1 bare pcb and bdm
regrds
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Jaguar 0.7-alpha kits For Sale
PM sent to AldoQ with cost and shipping information request.AldoQ wrote:Hi
i want 1 bare pcb and bdm
regrds
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
Re: Jaguar 0.7-alpha kits For Sale
what is the status of new boards/kits?
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Jaguar 0.7-alpha kits For Sale
I worked on the design for Jaguar v0.8, which has a few improvements over the v0.7, a while ago. I just haven’t finished the design since I was waiting to see if there were any further refinements to make to the design.
I just recently sold the last of the v0.7 boards so it might be time for a new run of boards.
I do have CoolEFI Basic ECU v0.2-alpha fully assembled boards in stock which is based on the Jaguar schematics and has many of the capabilities of the Jaguar PCB along with a simple Molex connector. I was designed for 4 cylinder engines and has run my 2.2L Chevrolet S10 with FreeEMS using the same firmware that was build for the Jaguar v0.7-alpha that was previously in the S10. The Basic ECU can be found at http://www.coolefi.com.
If there is interest in a Jaguar v0.8 then I will invest some time and money to finish the design and have another run of PCBs manufactured.
I just recently sold the last of the v0.7 boards so it might be time for a new run of boards.
I do have CoolEFI Basic ECU v0.2-alpha fully assembled boards in stock which is based on the Jaguar schematics and has many of the capabilities of the Jaguar PCB along with a simple Molex connector. I was designed for 4 cylinder engines and has run my 2.2L Chevrolet S10 with FreeEMS using the same firmware that was build for the Jaguar v0.7-alpha that was previously in the S10. The Basic ECU can be found at http://www.coolefi.com.
If there is interest in a Jaguar v0.8 then I will invest some time and money to finish the design and have another run of PCBs manufactured.
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
Re: Jaguar 0.7-alpha kits For Sale
If I purchased a FreeEMS board it would need to be V8 compatible, so that leaves off the CoolEFI board.
I also may need a trans controller for this project if I proceed
It would be housed in a OEM case PNP style so I can switch back to OBD2 for emissions compliance testing. 04 Dakota w/Daimler V8
I also may need a trans controller for this project if I proceed
It would be housed in a OEM case PNP style so I can switch back to OBD2 for emissions compliance testing. 04 Dakota w/Daimler V8
Re: Jaguar 0.7-alpha kits For Sale
If it helps you to cover some costs I will take one or two pcbs
Re: Jaguar 0.7-alpha kits For Sale
What has changed in the 0.8 board?