Jaguar 0.7-alpha kits For Sale

If you want to sell that old MegaSquirt or Link hardware, here's the place to try.
reanimotion
QFP80 - Contributor
Posts: 34
Joined: Sun Apr 14, 2013 8:50 am
Location: Australia

Re: Jaguar 0.7-alpha kits For Sale

Post by reanimotion »

Arrived today.
Thanks Andy!
Steve
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
reanimotion
QFP80 - Contributor
Posts: 34
Joined: Sun Apr 14, 2013 8:50 am
Location: Australia

Re: Jaguar 0.7-alpha kits For Sale

Post by reanimotion »

Serial #33 donated to FreeEMS community
Steve
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Jaguar 0.7-alpha kits For Sale

Post by Fred »

reanimotion wrote:Serial #33 donated to FreeEMS community
I speak for at least myself and the person in possession of it when I say: Thank you very much! <3

It could run an engine tomorrow, or if not, any day now, and an epic and infamous engine at that! :-D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
AldoQ
QFP80 - Contributor
Posts: 31
Joined: Fri Apr 04, 2008 1:26 am

Re: Jaguar 0.7-alpha kits For Sale

Post by AldoQ »

Hi
i want 1 bare pcb and bdm
regrds
User avatar
DeuceEFI
LQFP144 - On Top Of The Game
Posts: 578
Joined: Thu Feb 25, 2010 3:57 am
Location: Gosport, IN USA
Contact:

Re: Jaguar 0.7-alpha kits For Sale

Post by DeuceEFI »

AldoQ wrote:Hi
i want 1 bare pcb and bdm
regrds
PM sent to AldoQ with cost and shipping information request.
EFIRick
TO220 - Visibile
Posts: 9
Joined: Sat Apr 11, 2015 10:26 pm

Re: Jaguar 0.7-alpha kits For Sale

Post by EFIRick »

what is the status of new boards/kits?
User avatar
DeuceEFI
LQFP144 - On Top Of The Game
Posts: 578
Joined: Thu Feb 25, 2010 3:57 am
Location: Gosport, IN USA
Contact:

Re: Jaguar 0.7-alpha kits For Sale

Post by DeuceEFI »

I worked on the design for Jaguar v0.8, which has a few improvements over the v0.7, a while ago. I just haven’t finished the design since I was waiting to see if there were any further refinements to make to the design.

I just recently sold the last of the v0.7 boards so it might be time for a new run of boards. :-)

I do have CoolEFI Basic ECU v0.2-alpha fully assembled boards in stock which is based on the Jaguar schematics and has many of the capabilities of the Jaguar PCB along with a simple Molex connector. I was designed for 4 cylinder engines and has run my 2.2L Chevrolet S10 with FreeEMS using the same firmware that was build for the Jaguar v0.7-alpha that was previously in the S10. The Basic ECU can be found at http://www.coolefi.com.

If there is interest in a Jaguar v0.8 then I will invest some time and money to finish the design and have another run of PCBs manufactured.
EFIRick
TO220 - Visibile
Posts: 9
Joined: Sat Apr 11, 2015 10:26 pm

Re: Jaguar 0.7-alpha kits For Sale

Post by EFIRick »

If I purchased a FreeEMS board it would need to be V8 compatible, so that leaves off the CoolEFI board.

I also may need a trans controller for this project if I proceed

It would be housed in a OEM case PNP style so I can switch back to OBD2 for emissions compliance testing. 04 Dakota w/Daimler V8
User avatar
Matthijs
LQFP112 - Up with the play
Posts: 113
Joined: Fri Aug 16, 2013 9:40 am

Re: Jaguar 0.7-alpha kits For Sale

Post by Matthijs »

If it helps you to cover some costs I will take one or two pcbs
EFIRick
TO220 - Visibile
Posts: 9
Joined: Sat Apr 11, 2015 10:26 pm

Re: Jaguar 0.7-alpha kits For Sale

Post by EFIRick »

What has changed in the 0.8 board?
Post Reply