View unanswered posts | View active topics It is currently Wed Sep 20, 2017 7:34 pm



Reply to topic  [ 7 posts ] 
Frankenso for rusEfi: kits or assembled 
Author Message
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
bare PCB for rusEfi to be used with an old 64 Mazda ECU case. These four layer boards are larger then the two layer Frankenstein boards, with these one has an option to solder an stm32f4 chip right on the board.

Image

$39

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com


Last edited by russian on Sun Jan 25, 2015 1:50 am, edited 2 times in total.



Tue Dec 30, 2014 3:45 pm
Profile
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
Also available as a kit with the connector and all the I/O chips

Image

$90

x1 Frankenso board
x12 low-side VNS14NV04
x3 op-amp LMV324IDT
x3 high-side TC4427
x2 2x25 header
x2 SD card socket
x1 VR INTERFACE MAX9926
x1 CAN interface SN65HVD230
x2 33uH Inductor
x2 CAP TANT 220UF
x1 IC REG BUCK 5V 3A
x1 CAP ALUM 680UF
x4 misc diodes for power supply
x1 HIP9011 knock detection chip
x1 4MHz osc for HIP9011

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com


Tue Dec 30, 2014 3:47 pm
Profile
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
Have two fully assembled boards

Image
https://www.tindie.com/products/russian/frankenso-01-assembled/

Image
https://www.tindie.com/products/russian/frankenso-01-full-bundle/

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com


Sun Jan 25, 2015 1:52 am
Profile
QFP80 - Contributor
User avatar

Joined: Sat Aug 10, 2013 5:47 am
Posts: 59
Location: New Zealand
Interesting... is that the same ECU connector as 90's Mitsubishi/Toyota? Denso OEM ECU case?

_________________
IRC nick: ignitionigel or Nige


Sun Jan 25, 2015 4:44 am
Profile WWW
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
Yes, same 64 pin connector as 90's Mitsubishi/Toyota/Honda/Mazda. Yep, Denso OEM case from a Mazda 323/Protege/Miata.

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com


Sun Jan 25, 2015 4:47 am
Profile
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
Second batch of assembled version 0.4 has arrived. Note larger proto area and two extra low current drivers.


Attachments:
IMAG1600%5B1%5D.jpg
IMAG1600%5B1%5D.jpg [ 1.7 MiB | Viewed 7180 times ]

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com
Tue Nov 17, 2015 1:54 am
Profile
LQFP112 - Up with the play
User avatar

Joined: Fri Feb 01, 2013 4:18 pm
Posts: 143
Location: Jersey City, USA
New batch of same exact Frankenso 0.4 has arrived - boards are back in stock.

https://www.tindie.com/products/russian ... ll-bundle/

_________________
http://forum.diyefi.org/viewtopic.php?t=2070 http://www.rusefi.com


Sat Feb 25, 2017 4:40 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.