Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jaguar
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I am interested in a board.
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Is there any PCB left? Without any components should do
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Just a reminder, there are an infinite number left, they've not been finalised yet, and not been made yet. Some bullet-proofing testing is going on right now (BIG Thanks Andy!) and it shouldn't be too long (2 weeks or so?) before some get ordered.
If you order without SMD components you also need one of these: http://www.coolefi.com/usbdm.php
For everyone else, a certain amount of patience will be necessary as demand seems to be exceeding Andy's supply of time. I guess others such as me could step up to do the SMD work or all work for people for a fee/donation as well as Andy, but I'm personally too busy until January or so.
Once things are ready to go, Andy can start a new thread with info on options/prices/quotas (willing to do X smd, Y full, Z parts, W blank) and we can get confirmations and figure out the order quantity required. Looks like we may need to get 30, which is a bit scary, more could be ordered later if there are no flaws found, or a new version could be spun for testing if flaws are found.
Read these for more info:
viewtopic.php?f=67&t=2212
viewtopic.php?f=67&t=2214
viewtopic.php?f=67&t=2225
Fred.
If you order without SMD components you also need one of these: http://www.coolefi.com/usbdm.php
For everyone else, a certain amount of patience will be necessary as demand seems to be exceeding Andy's supply of time. I guess others such as me could step up to do the SMD work or all work for people for a fee/donation as well as Andy, but I'm personally too busy until January or so.
Once things are ready to go, Andy can start a new thread with info on options/prices/quotas (willing to do X smd, Y full, Z parts, W blank) and we can get confirmations and figure out the order quantity required. Looks like we may need to get 30, which is a bit scary, more could be ordered later if there are no flaws found, or a new version could be spun for testing if flaws are found.
Read these for more info:
viewtopic.php?f=67&t=2212
viewtopic.php?f=67&t=2214
viewtopic.php?f=67&t=2225
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I think I can borrow this one: http://www.pemicro.com/products/product ... duct_id=33
Would that be compatible or is the USBDM preferable over the PE Micro device?
Some waiting is no issue, with more projects than time available I've ordered 5 S912XDP512F0MAL CPU's.. as I only need one and one for spare, perhaps I can give 'the community' 2 or 3 back for testing or development?
Would that be compatible or is the USBDM preferable over the PE Micro device?
Some waiting is no issue, with more projects than time available I've ordered 5 S912XDP512F0MAL CPU's.. as I only need one and one for spare, perhaps I can give 'the community' 2 or 3 back for testing or development?
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
PE one works, but you may need codebloatier to use it. USBDM is usable on Linux and Winblows. Will PM you.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Since the trigger hasn't been pulled on this batch. I would like to have 2 boards.
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I quite interested in just the board and the BOM (smd only or whatever is convenient)
I think it's time I learn how to solder SMD stuff. I have a friend with RSI who can no longer do it but is wilingl to teach me
(and its not Fred!)
so yea, however it comes, I'm still keen as mustard.
And besides its supposed to be DIY, not DSOIY (Do some of it yourself) so I'd rather provide as much of the doing as I am capable.
meow?
I think it's time I learn how to solder SMD stuff. I have a friend with RSI who can no longer do it but is wilingl to teach me
(and its not Fred!)
so yea, however it comes, I'm still keen as mustard.
And besides its supposed to be DIY, not DSOIY (Do some of it yourself) so I'd rather provide as much of the doing as I am capable.
meow?
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
Purrrrrr. Well said.
EDIT: Make sure customs value is marked down enough ;-)
EDIT: Make sure customs value is marked down enough ;-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
I think I take 2 as well. Ordered some flux already.. I guess it is the best reason to start learning soldering SMD =]
How much is shipping to the Netherlands?
How much is shipping to the Netherlands?
Re: Feeler For Interest In Next 10 Of Andy's 0.6-alpha Jagua
@MatthijsMatthijs wrote:I think I take 2 as well. Ordered some flux already.. I guess it is the best reason to start learning soldering SMD =]
How much is shipping to the Netherlands?
Maybe we should have our boards shipped together...