Location of extra FAQ, hardware/software scope docs etc...

Free and Open Source Engine Management discussions excluding more specific things on this board.
Post Reply
Owen_N
TO92 - Vaguely active
Posts: 2
Joined: Thu Mar 24, 2016 6:18 am

Location of extra FAQ, hardware/software scope docs etc...

Post by Owen_N »

Where is all this stuff?
I am not a hardware builder - can I use existing "cheaper" hardware?
I just want a topnotch ignition controller for a special V-twin project. Is this suitable?
(similar to a good car one: knock sensing, remapping etc)
Should I use Holley smart coils, or a power box? I want to run 3 plugs per cylinder.
What is a good alternative coil to use?
How do I run 3 coils in parallel, firing at the same time? Is it similar to a wasted spark setup?

I am also not a fluent C programmer. How do I find out about user interfaces?
--
Owen_N
Owen_N
TO92 - Vaguely active
Posts: 2
Joined: Thu Mar 24, 2016 6:18 am

Never mind. Finally found all sites, wiki,why etc

Post by Owen_N »

Looks like this is not really a user system yet.
I will head over to the megasquirt forum, and carry on there.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Location of extra FAQ, hardware/software scope docs etc.

Post by Fred »

Let us know if you change your mind and want some answers to the above. :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply