DIYEFI.org Forum

To anyone interested, I have modified the original MegasuirtAVR code for Arduino Uno.
Here is my project page:

https://sourceforge.net/projects/arduems/

Currently it has about the same features as the original Megasquirt 1, these include:
- 8x8 ve table
- warmup, tps and baro enrichment
- Alpha-N or Speed Density

It can be tuned as Megasquirt 1 in TunerStudio, MegaTune or MegaTunix.
Hardware is currently being developed and should be similar but not the same as Megasquirt PCBv3.0 main board.

This should work out to be a super cheap fuel injection setup.

You didn't format the link correctly, so it's unclickable.

You also uploaded the code into the downloads section instead of git! No one will download each .c/.h file one by one...

This should work out to be a super cheap fuel injection setup.

The phrase "you get what you pay for" comes to mind.

You didn't format the link correctly, so it's unclickable.

Sorry, fixed it.

You also uploaded the code into the downloads

I have not had time to set up git. It will be done soon.

The phrase "you get what you pay for" comes to mind.

Yes you are right it is not very advanced. Why so much hostility? I didn't even wrote the code

No hostility, I just think you're wasting your time (on multiple levels), that's all.

Git is set up.

Got half a shield board made. Arduino just plugs in on top. Selling my car and rebuilding my motorbike so wont have any engines to test on for a while unfortunately

buy a small engine and use that to test on.