ArduEMS - reviving MegasuirtAVR

Free and Open Source Engine Management discussions excluding more specific things on this board.
Post Reply
crazyafrican
DIP8 - Involved
Posts: 24
Joined: Fri May 10, 2013 5:43 am
Location: Auckland, New Zealand

ArduEMS - reviving MegasuirtAVR

Post by crazyafrican »

To anyone interested, I have modified the original MegasuirtAVR code for Arduino Uno.
Here is my project page:

https://sourceforge.net/projects/arduems/

Currently it has about the same features as the original Megasquirt 1, these include:
- 8x8 ve table
- warmup, tps and baro enrichment
- Alpha-N or Speed Density

It can be tuned as Megasquirt 1 in TunerStudio, MegaTune or MegaTunix.
Hardware is currently being developed and should be similar but not the same as Megasquirt PCBv3.0 main board.

This should work out to be a super cheap fuel injection setup.
Last edited by crazyafrican on Sat May 18, 2013 11:50 am, edited 1 time in total.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ArduEMS - reviving MegasuirtAVR

Post by Fred »

You didn't format the link correctly, so it's unclickable.

You also uploaded the code into the downloads section instead of git! No one will download each .c/.h file one by one...
This should work out to be a super cheap fuel injection setup.
The phrase "you get what you pay for" comes to mind.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
crazyafrican
DIP8 - Involved
Posts: 24
Joined: Fri May 10, 2013 5:43 am
Location: Auckland, New Zealand

Re: ArduEMS - reviving MegasuirtAVR

Post by crazyafrican »

You didn't format the link correctly, so it's unclickable.
Sorry, fixed it.
You also uploaded the code into the downloads
I have not had time to set up git. It will be done soon.
The phrase "you get what you pay for" comes to mind.
Yes you are right it is not very advanced. Why so much hostility? I didn't even wrote the code
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ArduEMS - reviving MegasuirtAVR

Post by Fred »

No hostility, I just think you're wasting your time (on multiple levels), that's all.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
crazyafrican
DIP8 - Involved
Posts: 24
Joined: Fri May 10, 2013 5:43 am
Location: Auckland, New Zealand

Re: ArduEMS - reviving MegasuirtAVR

Post by crazyafrican »

Git is set up.

Got half a shield board made. Arduino just plugs in on top. Selling my car and rebuilding my motorbike so wont have any engines to test on for a while unfortunately
JareeB
QFP80 - Contributor
Posts: 42
Joined: Tue Dec 25, 2012 12:14 am
Location: Greenville, Wisconsin

Re: ArduEMS - reviving MegasuirtAVR

Post by JareeB »

buy a small engine and use that to test on.
plans to build a 300whp turbo ford ranger with a 2.3l engine the ford lima!
current rig: 1994 ford ranger 2.3. good platform for my almost complete turbo engine. a237 cam, stock t3 turbo, ported and polished head. just needs some mangement!!
Post Reply