To anyone interested, I have modified the original MegasuirtAVR code for Arduino Uno.
Here is my project page:
https://sourceforge.net/projects/arduems/
Currently it has about the same features as the original Megasquirt 1, these include:
- 8x8 ve table
- warmup, tps and baro enrichment
- Alpha-N or Speed Density
It can be tuned as Megasquirt 1 in TunerStudio, MegaTune or MegaTunix.
Hardware is currently being developed and should be similar but not the same as Megasquirt PCBv3.0 main board.
This should work out to be a super cheap fuel injection setup.
ArduEMS - reviving MegasuirtAVR
-
- DIP8 - Involved
- Posts: 24
- Joined: Fri May 10, 2013 5:43 am
- Location: Auckland, New Zealand
ArduEMS - reviving MegasuirtAVR
Last edited by crazyafrican on Sat May 18, 2013 11:50 am, edited 1 time in total.
Re: ArduEMS - reviving MegasuirtAVR
You didn't format the link correctly, so it's unclickable.
You also uploaded the code into the downloads section instead of git! No one will download each .c/.h file one by one...
You also uploaded the code into the downloads section instead of git! No one will download each .c/.h file one by one...
The phrase "you get what you pay for" comes to mind.This should work out to be a super cheap fuel injection setup.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- DIP8 - Involved
- Posts: 24
- Joined: Fri May 10, 2013 5:43 am
- Location: Auckland, New Zealand
Re: ArduEMS - reviving MegasuirtAVR
Sorry, fixed it.You didn't format the link correctly, so it's unclickable.
I have not had time to set up git. It will be done soon.You also uploaded the code into the downloads
Yes you are right it is not very advanced. Why so much hostility? I didn't even wrote the codeThe phrase "you get what you pay for" comes to mind.
Re: ArduEMS - reviving MegasuirtAVR
No hostility, I just think you're wasting your time (on multiple levels), that's all.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- DIP8 - Involved
- Posts: 24
- Joined: Fri May 10, 2013 5:43 am
- Location: Auckland, New Zealand
Re: ArduEMS - reviving MegasuirtAVR
Git is set up.
Got half a shield board made. Arduino just plugs in on top. Selling my car and rebuilding my motorbike so wont have any engines to test on for a while unfortunately
Got half a shield board made. Arduino just plugs in on top. Selling my car and rebuilding my motorbike so wont have any engines to test on for a while unfortunately
-
- QFP80 - Contributor
- Posts: 42
- Joined: Tue Dec 25, 2012 12:14 am
- Location: Greenville, Wisconsin
Re: ArduEMS - reviving MegasuirtAVR
buy a small engine and use that to test on.
plans to build a 300whp turbo ford ranger with a 2.3l engine the ford lima!
current rig: 1994 ford ranger 2.3. good platform for my almost complete turbo engine. a237 cam, stock t3 turbo, ported and polished head. just needs some mangement!!
current rig: 1994 ford ranger 2.3. good platform for my almost complete turbo engine. a237 cam, stock t3 turbo, ported and polished head. just needs some mangement!!