lc-1 problems, first was erradic, now nothing at all :(
-
- DIP8 - Involved
- Posts: 19
- Joined: Sun Apr 20, 2008 1:48 am
lc-1 problems, first was erradic, now nothing at all :(
hey, so i'm finaly nearing the end of my engine swap, with a ms2 and a lc-1 o2 sensor. at first the sensor was reading very speradic. and now it just does nothing, the little light doesn't even come on. i've checked the power and ground and all checks out there. any ideas? i'd hate to see this thing cooked after 20 mins of use....
Re: lc-1 problems, first was erradic, now nothing at all :(
You realise there are two grounds right? If you hook up only one, I believe you could damage it like that. It would also explain your funky readings. Sounds like time to phone/email Innovate or sign up to their forum to me. Their customer service is pretty good. If it doesn't come on, it doesn't come on, what can you say/do? Not much.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- DIP8 - Involved
- Posts: 19
- Joined: Sun Apr 20, 2008 1:48 am
Re: lc-1 problems, first was erradic, now nothing at all :(
yah, i got both grounds soldered to a single lug.
Re: lc-1 problems, first was erradic, now nothing at all :(
this may help
http://www.innovatemotorsports.com/foru ... y.php?f=10
http://www.innovatemotorsports.com/foru ... y.php?f=10
Legal disclaimer for all my posts: I'm not responsible for anything, you are responsible for everything. This is an open and free world with no strings attached.
Re: lc-1 problems, first was erradic, now nothing at all :(
From the guy that said "teach him to fish, don't fish for him" posting the link seems like a sarcy comment more than a helpful thing to do. I'll give you the benefit of the doubt this time.Admin wrote:Sounds like time to phone/email Innovate or sign up to their forum to me.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: lc-1 problems, first was erradic, now nothing at all :(
probably not related, but when i installed my lc-1 it would light up every 3rd try or so. finally checked the firmware (v1) and updated it to the newest. havn't had a problem since.
Re: lc-1 problems, first was erradic, now nothing at all :(
Thanks! Exactly what forums are for :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!