Engine Control Unit (ECU) using dsPIC33F

Free and Open Source Engine Management discussions excluding more specific things on this board.
Post Reply
hameeds01
TO220 - Visibile
Posts: 4
Joined: Sat Feb 11, 2012 7:14 pm

Engine Control Unit (ECU) using dsPIC33F

Post by hameeds01 »

Hello dudes,

I have made a Universal Engine Control Unit (ECU) using dsPIC33F equipped with DSP Engine, it can run any Gasoline 1,2,3,4,6,8 Cylinder Engine. it can also support VTEC/VVT, + lot more advance features

Have a look at it

http://www.youtube.com/watch?v=QJekC7DcIqk

Best Regards
Asad
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Engine Control Unit (ECU) using dsPIC33F

Post by Fred »

So I take it that this is an upgrade from your previous attempt?

Between the footage of the alternator while blipping the throttle, and the multicoloured lighting and pyrotechnics, you've made my day!

Where is the git repository for your firmware?

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
hameeds01
TO220 - Visibile
Posts: 4
Joined: Sat Feb 11, 2012 7:14 pm

Re: Engine Control Unit (ECU) using dsPIC33F

Post by hameeds01 »

yup its an upgrade of previous version, this time i used a high Speed DSP Processor,

the LEDs r indicating Fuel Injectos, Ignition Coils, VVT Valve, IAC, FAN ,fuel Pump, Status Flags etc

when a person is JOBLESS & he has nothing to do then he develop such stupid Toys to play with them. just to kill time.

Best Regards
Asad (Jobless fellow)
Post Reply