I "molded" the JAW display to the top. Any help would be appreciated.
Thanks,
Sean
I need help finding this connector for my EGT System
-
SleepyKeys
- LQFP144 - On Top Of The Game
- Posts: 549
- Joined: Mon Feb 11, 2008 10:52 pm
- Location: Arizona
- Contact:
I need help finding this connector for my EGT System
I'm looking for the green connector. I have been able to find it from guys that sell the EGT controller but I have a list of things I need to get from mouser/digikey and was trying to hunt the part number down.
I "molded" the JAW display to the top. Any help would be appreciated.
Thanks,
Sean
I "molded" the JAW display to the top. Any help would be appreciated.
Thanks,
Sean
You snooze, you lose!
Re: I need help finding this connector for my EGT System
was going to suggest just any connector + green spraypaint, but then realized that it's not the color but the particular shape of the connector that was of interest to you
nice molding job
nice molding job
Legal disclaimer for all my posts: I'm not responsible for anything, you are responsible for everything. This is an open and free world with no strings attached.
-
SleepyKeys
- LQFP144 - On Top Of The Game
- Posts: 549
- Joined: Mon Feb 11, 2008 10:52 pm
- Location: Arizona
- Contact:
Re: I need help finding this connector for my EGT System
Yup so "nice" I used Velcro for quick removal haha. I found the connector years ago, but have forgot since then.
You snooze, you lose!
-
thebigmacd
- LQFP112 - Up with the play
- Posts: 205
- Joined: Thu Apr 10, 2008 5:51 pm
Re: I need help finding this connector for my EGT System
They are made by Phoenix Contact, 3.81mm Screw Terminal Connector, 4 Position
Part# 1803594
http://www.digikey.com/scripts/DkSearch ... 77-1163-ND
This guy right here
http://octopart.com/info/Phoenix%20Contact/1803594
There are also 3.5mm versions.
Part# 1803594
http://www.digikey.com/scripts/DkSearch ... 77-1163-ND
This guy right here
http://octopart.com/info/Phoenix%20Contact/1803594
There are also 3.5mm versions.
Keith MacDonald
Control Engineering (Systems) Technologist
Control Engineering (Systems) Technologist
-
SleepyKeys
- LQFP144 - On Top Of The Game
- Posts: 549
- Joined: Mon Feb 11, 2008 10:52 pm
- Location: Arizona
- Contact:
Re: I need help finding this connector for my EGT System
YOU'RE THE MAN!thebigmacd wrote:They are made by Phoenix Contact, 3.81mm Screw Terminal Connector, 4 Position
Part# 1803594
http://www.digikey.com/scripts/DkSearch ... 77-1163-ND
This guy right here
http://octopart.com/info/Phoenix%20Contact/1803594
There are also 3.5mm versions.
Thanks
Sean
You snooze, you lose!
-
GartnerProspect
- LQFP112 - Up with the play
- Posts: 160
- Joined: Tue Apr 08, 2008 9:14 pm
Re: I need help finding this connector for my EGT System
I love happy endings. 
Re: I need help finding this connector for my EGT System
Me too! :-)GartnerProspect wrote:I love happy endings. :D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!