View unanswered posts | View active topics It is currently Sun Sep 23, 2018 6:10 am

Reply to topic  [ 11 posts ]  Go to page Previous  1, 2
Trailer Improvements 
Author Message
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15181
Location: Home sweet home!
Also, with respect those cages, they'd seen some internal impacts and abuse and had been stretched a bit etc. IE, more wire = better. Perhaps something like this or this:

25x25x4.0 galv mesh: ... 1725932708 (22.75kg, $101.75)
50x50x5.3 galv mesh: ... 1725932676 (20.00kg, $104.50)

Both about 20kg and $100 per sheet. Bother heavier in different ways than the stuff on the rentals above. Didn't measure the wire, but could.

Finer wire, finer mesh = worse impact resistance, but less stuff will slip through.
Thick wire, coarse mesh = better impact resistance, but more stuff will slip through.

Have 1360x2 + 2400x2 to do, sheets are 1200x2400, height 800 probably, best approach is probably:

sheets cut into thirds length ways
sides made of two panels of mesh with a vertical support in the middle = 4 segments for sides
2 segments left over insufficient for front and back, but only just, hmmm, deficit is 160mm
If sides protrude to front edge of front gate and back edge of tail gate, then 1360 is reduced by thickness of verticals
Using 25x50 box for verticals at each side of the front and/or rear and another the same in the middle leaves only a 10mm deficit total
And 4 places to take up the slack = 2.5mm each plus 0.5mm each of cut down the mesh - easily bridgeable with weld

Therefore I can get away with exactly 3 sheets, with that scheme or a similar one.

Images cached for the record:



_________________ - where Open Source means Open Source, and Free means Freedom - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!

Sat Aug 11, 2018 9:50 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 11 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.