Page 2 of 2

Re: DIY Hydraulic Press Mini Project

Posted: Mon Mar 13, 2017 8:41 am
by Fred
Tidied up the garage and moved the steel from "in the way" to "ready for action": https://twitter.com/FredCookeNZ/status/ ... 2459988992

Image

Re: DIY Hydraulic Press Mini Project

Posted: Wed Mar 29, 2017 10:26 am
by Fred
Another important piece of the puzzle! Springs! :-D https://twitter.com/FredCookeNZ/status/ ... 1175903232

Image







Next up, a bag of fasteners for the wheels!

EDIT: Spring length and stretch measurements: https://twitter.com/FredCookeNZ/status/ ... 1249702912

Image





Copy/paste:
200mm ID hook to hook for the Volvo 940 bonnet springs, and ~130mm of coils. At the least it should stretch to 330mm and quite likely 460mm!
Which is ample as the jack only has 150mm of dynamic travel. So I'll just set these with a tiny bit of tension at 0 and they'll wring out to +150mm no worries.