Page 2 of 4
Re: Tools You Wish You Had
Posted: Sat Sep 16, 2017 9:47 am
by Fred
Compressor may or may not be happy, need to give it a try on a more reliable power source than the 60+ year old 15 amp breaker for the garage.
Aside from that, I splurged on a whole lot of related tools for this thread late last night. Pics when they arrive on my door step :-)
Re: Tools You Wish You Had
Posted: Fri Sep 22, 2017 12:29 pm
by Fred
Re: Tools You Wish You Had
Posted: Sat Oct 07, 2017 5:52 am
by Fred
Re: Tools You Wish You Had
Posted: Mon Oct 30, 2017 4:22 am
by Fred
Re: Tools You Wish You Had
Posted: Thu Nov 02, 2017 10:05 pm
by Fred
Roloc rubber finger bristle disks labeled for future reference without internet help:
https://twitter.com/FredCookeNZ/status/ ... 1203108864
Re: Tools You Wish You Had
Posted: Sun Nov 12, 2017 12:52 pm
by Nick_nl
I had one of those, the ebay listing said it could also do stainless steel fuel line, it cant
The back broke out completely.
For cunifer it did work great.
Re: Tools You Wish You Had
Posted: Sun Nov 12, 2017 1:47 pm
by Fred
Wow, where exactly did it break? Will pass that on to the owner of this one!
This weekend I gave the 3M Roloc Bristle Disks a go, and they work great. A lot more aggressive than I was expecting, possibly due to the speed I was spinning them. Green eats rust from steel pretty quickly. White if used carefully pulls stuff from alloy without excess harm. You could still see the original machining marks in the head after I was done. Even the white one will radius an edge it's approaching, though. So you have to be careful which way you're going etc.
And in the process of that, I gave the compressor its first serious usage. It ran solidly for a few hours both days, no drama. It was indoors, though, and the room smelled like cooked paint after a good session :-D Will have to give it the oil change at some point. I forget how many hours he said to do it in, but it wasn't much. Still only a fraction of the way to not much, however.
Re: Tools You Wish You Had
Posted: Sat Nov 25, 2017 12:32 am
by Fred
More updates for me:
Gave the compressor a good solid use session while redoing the head gasket on the Volvo 360 hatch. Never missed a beat with a lead run up through the house into the side of the stove. Won't run in the garage with the shitty 1960s circuit breaker, though. Kinda annoying, but not the end of the world, for now. Will have to do the same for any welding, too.
And today's acquistions...
Yesterday around lunch time an email came out advertising a really good deal on a DeWALT Lithium Ion cordless hammer drill with 6AH battery, and charger.
I didn't really want a cordless drill, though it didn't take long to figure out that the battery packs are nearly as much as the special on the drill and the battery charger combo works fine for the impact wrench/rattle gun, too... 950nm of impact torque. Impressive.
Nearly missed the deal, though. Online sold out by 5pm or so. Got up early and was at the shop when it opened this morning, and another branch in a poorer part of Auckland still had stock, so I got some held for me and shot over there to pay/pick up.
Then I got home and charged it and browsed and thought and decided to go back and get an impact driver, too. So here's the collection from this morning's splurge:
https://twitter.com/FredCookeNZ/status/ ... 0813981696
https://twitter.com/FredCookeNZ/status/ ... 7217935360
https://twitter.com/FredCookeNZ/status/ ... 8328227840
https://twitter.com/FredCookeNZ/status/ ... 5985944576
https://twitter.com/FredCookeNZ/status/ ... 7501152256
https://twitter.com/FredCookeNZ/status/ ... 5850599424
Looking forward to putting all three of them to good use on various projects very soon! :-)
Re: Tools You Wish You Had
Posted: Sun Nov 26, 2017 9:14 am
by Fred
Today's acquisition:
Scored a 160 litre (~44 us gallon) air tank/receiver with wheels and handles for $60 NZ (~40 usd) :-)
https://twitter.com/FredCookeNZ/status/ ... 4028228608
https://twitter.com/FredCookeNZ/status/ ... 5469648896
And for scale, next to the 940 wagon's nose:
https://twitter.com/FredCookeNZ/status/ ... 6402679808
About 1400mm long to the tips, 1300 equivalent of main diameter, 400mm OD main diameter. Should really smooth out the air supply and minimise wear on the relay(s) and start capacitor in the compressor.
Also got this action shot using the wrong tool on the 940 engine's head:
https://twitter.com/FredCookeNZ/status/ ... 8970763264
Re: Tools You Wish You Had
Posted: Mon Nov 27, 2017 10:31 am
by Fred