DIYEFI.org Forum
http://forum.diyefi.org/

BrickEMS.com
http://forum.diyefi.org/viewtopic.php?f=14&t=1780
Page 1 of 2

Author:  Fred [ Tue Jun 12, 2012 1:07 am ]
Post subject:  BrickEMS.com

Taken directly from the BrickEMS.com website to save me typing:

Quote:
Brick Engine Management Systems

The engine management company with the design philosophy of a brick!

Adding value through cost-effective EMS add-on hardware solutions!

BrickEMS.com, the engine management system company with the design philosophy of a brick. Our product design guidelines, listed below, have a lot in common with the humble brick. If you're sick of overly expensive, overly complex, unreliable, difficult to modify engine management hardware, we think you'll find BrickEMS.com refreshingly different!

  • Shape, like a brick.
  • Cheap, like a brick.
  • Simple, like a brick.
  • Reliable, like a brick.
  • DIY-able, like a brick.
  • Expandable, like a brick.

Visit BrickEMS.com now!

Author:  Costa [ Tue Jun 12, 2012 10:13 am ]
Post subject:  Re: BrickEMS.com

Great product. I was looking for an easy max9926 solution to upgrade my megapoo.

I assume you haven't seen this product from Symtec Labs, as it's not included in your comparison chart.
http://www.msextra.com/forums/viewtopic.php?f=67&t=45301&p=323656#p323656
http://www.symtechlabs.com/catalog/cam-sync-module-p-81.html
I was thinking of getting one until I realised it's only a single channel module. :(

Costa

Author:  MotoFab [ Thu Jun 14, 2012 4:31 am ]
Post subject:  Re: BrickEMS.com

Cool. This is the diyefi retail outlet so to speak? Congrats on your first product.

Author:  Fred [ Thu Jun 14, 2012 2:56 pm ]
Post subject:  Re: BrickEMS.com

Costa wrote:
Great product. I was looking for an easy max9926 solution to upgrade my megapoo.

Thanks! :-)

Quote:
I assume you haven't seen this product from Symtec Labs, as it's not included in your comparison chart.

Correct, I did know before you posted, but not before I posted. I need to do some updates, scheduled yesterday, may happen today.

Quote:
I was thinking of getting one until I realised it's only a single channel module. :(

I think they're neat! But horribly overpriced...

MotoFab wrote:
Cool. This is the diyefi retail outlet so to speak? Congrats on your first product.

Thanks. No, diyefi.org exists, as stated, in numerous places, to bring like minded and well behaved people together to enjoy projects like FreeEMS and SECU-3 etc.

The product came about because I needed something tiny and affordable that does a good job of dual VR inputs. No such thing existed, IE, existing stuff was too expensive.

I've been using a unit in the last few days for some experiments on an engine here in Spain and it's working just great! :-)

Image

Fred.

Author:  Fred [ Sat Jun 16, 2012 9:32 pm ]
Post subject:  Re: BrickEMS.com

Costa, I've updated the comparison page: Added Zeal board, Symtech board, NCV1124 chip, corrected some details, etc.

http://brickems.com/brickrpm/comparison

Fred.

Author:  Fred [ Thu Aug 09, 2012 1:13 am ]
Post subject:  Re: BrickEMS.com

"BrickEMS staff" are away from the office until around the 20th and will resume filling orders approximately then. Enjoy your summer holidays! :-)

PS: FreeEMS duties will continue as normal, more or less.

Author:  Fred [ Thu Aug 30, 2012 10:20 am ]
Post subject:  Re: BrickEMS.com

We're back and as of this morning, have no shortage of stock of the BrickRPM board. Let us know if you want one! :-)

Author:  arsenix [ Fri Aug 16, 2013 8:26 pm ]
Post subject:  Re: BrickEMS.com

I have been meaning to order one of these and looking at the website it appears there is no contact info.

Fred do you have any BrickRPM boards in stock?

Author:  Fred [ Fri Aug 16, 2013 9:37 pm ]
Post subject:  Re: BrickEMS.com

Sorry, I didn't link this here, but I have now: viewtopic.php?f=14&t=2080

Apologies for being unable to assist. :-(

Author:  arsenix [ Sat Aug 17, 2013 11:39 pm ]
Post subject:  Re: BrickEMS.com

Blast! I should have ordered one ages ago when they were available!

I samples some MAX chips... guess I'll just rig something on a proto board.

Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/