View unanswered posts | View active topics It is currently Tue Nov 21, 2017 8:52 am



Reply to topic  [ 4 posts ] 
EMStudio Screenshots: Post Your Cool Screenies Here! 
Author Message
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14871
Location: Home sweet home!
One image per post to keep the per-page weight down! Multiple sequential posts are OK, but limit it to 5, preferably 3 or less.

This is not mine, but it is BMWPower's and it's running on Windows 8:

Image

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sun Feb 17, 2013 9:05 pm
Profile WWW
LQFP112 - Up with the play
User avatar

Joined: Thu Feb 07, 2008 9:04 pm
Posts: 127
2014 bump!


Attachments:
emsstudiograb.png
emsstudiograb.png [ 510.97 KiB | Viewed 2242 times ]

_________________
90 Miata | 302rwhp @ 6450rpm | 281rwftlbs @ 4800rpm | FE-dohc 2.0L turbo
Wed Jun 11, 2014 12:34 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14871
Location: Home sweet home!
Quick, shut off your engine, it's going to melt! :-D Also, put on some clothes, at -67C you're going to freeze!

Fancy timing table! You realise you can use a lot coarser axes and go fine step once you have it rough tuned? Or is that Ben's default table we're looking at?

Please export your real timing table as a .json and send it to me so I can sort you out some custom ready to run firmware sometime soon :-)

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Wed Jun 11, 2014 9:47 am
Profile WWW
LQFP112 - Up with the play
User avatar

Joined: Thu Feb 07, 2008 9:04 pm
Posts: 127
Fred wrote:
..You realise you can use a lot coarser axes and go fine step once you have it rough tuned?

That's mine- no I didn't realiZe that. Just used the table that came up and adjusted values to match timing from the prior ecu.

_________________
90 Miata | 302rwhp @ 6450rpm | 281rwftlbs @ 4800rpm | FE-dohc 2.0L turbo


Wed Jun 11, 2014 1:17 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.