One image per post to keep the per-page weight down! Multiple sequential posts are OK, but limit it to 5, preferably 3 or less.
This is not mine, but it is BMWPower's and it's running on Windows 8:
EMStudio Screenshots: Post Your Cool Screenies Here!
EMStudio Screenshots: Post Your Cool Screenies Here!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: EMStudio Screenshots: Post Your Cool Screenies Here!
2014 bump!
90 Miata | 302rwhp @ 6450rpm | 281rwftlbs @ 4800rpm | FE-dohc 2.0L turbo
Re: EMStudio Screenshots: Post Your Cool Screenies Here!
Quick, shut off your engine, it's going to melt! :-D Also, put on some clothes, at -67C you're going to freeze!
Fancy timing table! You realise you can use a lot coarser axes and go fine step once you have it rough tuned? Or is that Ben's default table we're looking at?
Please export your real timing table as a .json and send it to me so I can sort you out some custom ready to run firmware sometime soon :-)
Fred.
Fancy timing table! You realise you can use a lot coarser axes and go fine step once you have it rough tuned? Or is that Ben's default table we're looking at?
Please export your real timing table as a .json and send it to me so I can sort you out some custom ready to run firmware sometime soon :-)
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: EMStudio Screenshots: Post Your Cool Screenies Here!
That's mine- no I didn't realiZe that. Just used the table that came up and adjusted values to match timing from the prior ecu.Fred wrote:..You realise you can use a lot coarser axes and go fine step once you have it rough tuned?
90 Miata | 302rwhp @ 6450rpm | 281rwftlbs @ 4800rpm | FE-dohc 2.0L turbo