New install on Mac OSX

MegaTunix is a cross-platform tuning application written and maintained by David J. Andruczyk. Discuss all things MTX here!
Post Reply
User avatar
flat4power
LQFP112 - Up with the play
Posts: 100
Joined: Mon Sep 24, 2012 8:19 am
Location: France

New install on Mac OSX

Post by flat4power »

Hi,

when I try to load megatunix, I choose "Go OffLine" mod because I haven't my FreeEMS board
I choose FreeEMS and go offline
This screen appear
Image

When I load MTX crash and I have this message in my terminal

CRITICAL **: freeems_find_mtx_page: assertion `firmware->page_params' failed

Can you help me

ps: if I made the same with MS2 Extra for example I have no crash

thanks for your help
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: New install on Mac OSX

Post by Fred »

None of the FreeEMS-capable/semi-capable apps can do offline mode right now. That's probably why it crashes. IMO it's poor that it crashes and doesn't just do nothing or pop up a warning/error.

You may be able to use the simulator on Mac, and you can definitely use EMStudio on the Mac. Mike and I would appreciate the testing if you want to give it a try.

http://malcom2073.github.com/emstudio/
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
flat4power
LQFP112 - Up with the play
Posts: 100
Joined: Mon Sep 24, 2012 8:19 am
Location: France

Re: New install on Mac OSX

Post by flat4power »

thanks for explanations

I go try EMStudio
User avatar
flat4power
LQFP112 - Up with the play
Posts: 100
Joined: Mon Sep 24, 2012 8:19 am
Location: France

Re: New install on Mac OSX

Post by flat4power »

QT4 installed on my OSX Lion

I don't know where I can post for EMStudio support ?
command 'qmake' seems to be ok because no return but command 'make' nothing bcause make: *** No targets specified and no makefile found. Stop.

I need help to compile EMStudio ;)
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: New install on Mac OSX

Post by Fred »

You can get live help on IRC from Mike, or you can post in the EMStudio sub-forum of the official FreeEMS apps section.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
flat4power
LQFP112 - Up with the play
Posts: 100
Joined: Mon Sep 24, 2012 8:19 am
Location: France

Re: New install on Mac OSX

Post by flat4power »

ok for IRC I know the channel but on which server : irc.quakenet.org ? an other ??
thanks
User avatar
masterkorp
LQFP112 - Up with the play
Posts: 171
Joined: Tue Jan 17, 2012 11:21 am
Location: Ponte de Lima, Portugal

Re: New install on Mac OSX

Post by masterkorp »

flat4power wrote:ok for IRC I know the channel but on which server : irc.quakenet.org ? an other ??
thanks
#freeems on irc.freenode.org
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: New install on Mac OSX

Post by Fred »

I added the server to the thread in a fairly obvious way. Sorry about that.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
flat4power
LQFP112 - Up with the play
Posts: 100
Joined: Mon Sep 24, 2012 8:19 am
Location: France

Re: New install on Mac OSX

Post by flat4power »

cool

thanks ;)

I follow my work on emstudio compilation ;)
Post Reply