DIYEFI.org Forum

wasted long weekend from hell... sick from a spider bite... and my freescale map sensor is dead! It just outputs about 4.5v constant. Input 5v and ground seem fine. The AAP is fine. Can't understand it last changes I made were the 12V-OUTPUT and ground as discussed above, and that works. And I had t...

Thank you prishta.

I'd like to share with you a revelation I had during my time here, Mr Anderson.
It came to me when I tried to classify the Jag inputs and outputs.
I realised that 12V-OUTPUT is not actually an output but an input for the outputs!

My comments about r19 were based on the 0.4 notes dated 16 Feb 2013. I didn't think of looking at the 0.6 schematics, duh.

I see the comment about not installing R19 and R16 has been removed in the later version.

Also it no longer says RPM-0- should be left disconnected. Makes lot more sense now.

I'm looking at a 0.4 alpha build so some things may be different to the 0.6 The edis input is a 12v hall type signal. Looking at the schematic notes : R19 should not be used for edis but on the same schematic it says R19 should be 1K for Hall, 10k for VR. RPM0-IN- should not be connected for edis so...

nearly complete old style stim attached testing inputs rpm still to be decided as I want to do edis first (for academic reasons only)

Pin 1 has a little notch on it.

Pics as promised

Coincidentally I've just been working with those. That one is fine for the AAP. For boosted MAP you want something like a MPXA4250AC6U which is what I used despite not planing to boost anytime soon.
Read up on the necessary trace cuts and patches before soldering those in.

Oops yes I meant MAP and AAP. Haven't got to IAT yet.

Thanks for moral support Pishta, a bit of progress after being distracted by business travel and a reluctant wide band. Tested serial access, verified logging, stopped and restarted logging, requested firmware version (benchtest), that sort of thing. BRV, IAT, and AAT circuits built. The latter 2 re...