Search found 135 matches

by m2cupcar
Thu Sep 08, 2016 2:39 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Success! 8-) And on the first try even if it was starving for fuel. I did have to move the fuel pump to LSD4 because I assumed the 95 Miata was like the 90. No. Will post up a thread on the car and link back here. Loading firmware update from 16 hours in the future. :lol: http://fe3miata.com/GRM/ima...
by m2cupcar
Sun Aug 14, 2016 6:31 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Tested and verified for full function through the OE connector wiring using my harness “stub” with some connections to the JimStim and EMStudio. Time to build some setup files.
Image
by m2cupcar
Sat Aug 13, 2016 11:56 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Thanks- I tried to make it pretty for presentation purposes. Why not if I'm going to the trouble to do it? ;) I put some bends in the VRs so there's some "slack". If the bottom panel pulls down, the board slide in the pcb rails towards the frame. That said- it's the bottom and that panel w...
by m2cupcar
Sat Aug 13, 2016 9:08 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Case Completed

A7 is now at home in a stock Miata Mx5 ecu case, wire to the stock connector. Plastic pin connector is mounted to an aluminum plate that screws down to the stock frame. The A7 then slides into the pcb rails mounted to the bottom ecu plate and that plate is screwed to the frame. A stop is added at th...
by m2cupcar
Thu Aug 11, 2016 1:47 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Case progress

Need remove one tab off the interior of the chassis so the regulators can mount up, then make the OE connector to A7 connections. http://fe3miata.com/GRM/images/16_0810_Jaguar-A7-case-02-1p.jpg http://fe3miata.com/GRM/images/16_0810_Jaguar-A7-case-01-1p.jpg http://fe3miata.com/GRM/images/16_0810_Jag...
by m2cupcar
Sun Aug 07, 2016 10:04 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Case is ready after some clipping and wicking the solder out of the connector's pins and screws.
Image
Image
by m2cupcar
Sat Aug 06, 2016 4:58 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

P1 connected to LSD1-IN and LSD1 output lead connected. Will this IAC-capable fw be available at .../firmware/dev/images or elsewhere?

Image

Image
by m2cupcar
Sat Aug 06, 2016 1:26 am
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Stim test success. FreeEMS disco tech: https://youtu.be/Vl1qlFi9fZA

Image
by m2cupcar
Fri Aug 05, 2016 8:56 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Fuel pump (HSD) works. I'm going to connect it to my jimstim and twist some knobs at this point. Then start the OE case install.
video courtesy of disco LED: https://youtu.be/3ti_jUyiEps
by m2cupcar
Fri Aug 05, 2016 1:42 pm
Forum: Jaguar
Topic: Building the Brains for a Budget Racer: Jaguar A7 #42
Replies: 53
Views: 115377

Re: Building the Brains for a Budget Racer: Jaguar A7 #42

Fred wrote:Don't worry about it too much.
Actually I think the PCB rails I use to mount (slide) the Jag in have enough tolerance to avoid the load concern here.