DIYEFI.org Forum

Builders,
The obsolete/unstocked/unobtainable/backordered/15 week leadtime ST VND7NV04 mosfet is now in stock at Mouser.com for a very good price of 1.70/pc with no cut reel charge. Their max9926 was also in the ballpark but no longer as cheap as originally called out.

After sleeping on it, I realized the 0 output on the 1 BAR is exactly 5.00V. Ill use that as the source voltage and retest the 2 BAR map and see if the voltages are truly proportional with the input voltage, along with a little boost pressure sample from a hand pump.

Ok, better late than never! 719 1 bar sensor in in-HG vac taken at 70F with reference voltage 5.11. (as close as I could get to 5.00 with what I had) 23 in .78v 22 in .91 21 in 1.05 20 in 1.22 19 in 1.41 18 in 1.63 17 in 1.78 16 in 1.98 15 in 2.16 14 in 2.36 13 in 2.54 12 in 11 in 2.89 10 in 3.08 9 ...

Granted. Î didn't mean to take it this far under anothers thread.

At this EDIS rate, yes. You mentioned waisted spark, can we do it with just a 36-1 wheel? Sold of my distributor in anticipation of this new ignition system.

You see where I'm going with this, right?

Dan: Build instructions are here: https://github.com/malcom2073/emstudio/blob/dev/README.md from the looks of the error you missed a step :P But as Fred said, use binaries from http://mikesshop/net/EMStudio unless you have a specific reason not to, and if so, let me know so I can fix that :) I got ...

Are you running EDIS on this motor? If so, how did you integrate into FreeEms> I believe its just a distributor signal....?

Peter, did you use EDIS on this or your Ford "distributor"?

Congrats Josh! sounds pretty mean. I was just in Escondido an saw about 10 English Minis at a restaurant. Some sort of club: reported by a Mopar guy. None as pumped as yours though....