Search found 46 matches

by amatt
Sun May 31, 2020 10:09 am
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Ahmad's 1994 Proton Wira (44th)

I'm not sure how to describe the 1k resistor. It is in JBperf 4channel ign/inj board. Let me attach drawing later.
by amatt
Sat May 30, 2020 3:26 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Ahmad's 1994 Proton Wira (44th)

I see my map is jumping around when rpm is reach 4-5k, then i realize I'm using MPX6250 when default is MPX4250. Can I just simply make a change here? #elif CONFIG == DEUCES10_ID MAPMinimum: GM1BarMin, MAPRange: GM1BarRange, #else MAPMinimum: MPX4250AMin, MAPRange: MPX4250ARange, #endif I also make ...
by amatt
Thu Apr 30, 2020 1:56 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Ahmad's 1994 Proton Wira (44th)

Let me fully understand how Freeems work. And yet to come, Kia Sportage (60-2/ 1cam) or Rover V8 3.9cc (8slot distributor) or maybe my friend drag car (4g63T targed boost 1.8bar). Hard to me decide. :D

***My friend 4g63T is fully loaded, currently running with MS2, Mapdaddy,and JB peak and hold.
by amatt
Wed Apr 29, 2020 10:18 am
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

And, no need to move this thread any further, though I will change the title for you if you tell me all the details of the car so I don't have to go searching :-) Just put 1994 Proton Wira. I think it's sound better. :D Meanwhile, Movement Control Order extended to another 2 weeks. I looking at the...
by amatt
Tue Apr 14, 2020 10:33 am
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

Got it sync with Scavanger firmware! I change CAS with another, and got it sync even cas is turning with finger.
IMG_20200414_172222.jpg
So, 4/2 slot type (currently I using at car) and 4/2 opto is different angle?
I see it running batch ignition/injection. How to make it run sequence injection?
by amatt
Sun Apr 12, 2020 8:24 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

Today I load Fred Hotel firmware, for my testing. Ardustim is set to 4clinder dizzy and it sync.
Righ now, I really lost my keen. :lol2:
shotel.png
by amatt
Sat Apr 11, 2020 5:40 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

Fred wrote: If you link me the data I could compare with my notes and let you know.
Please point me where to get those data.

I assume, Freeems and Libre use same style of decoder writing (I see your copyright there). FIY I got my engine start with Libre few days ago. It also sync with Ardustim.
by amatt
Fri Apr 10, 2020 8:17 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

I do some testing just now, 282 and 285 Scavenger s19, still same issue. It is normal firmware metadata is blank? s4.png This happen when Ardstim set rpm to 1100. -crank sync never be green -cam sync, last timestamp valid, last period valid blinking red green red green -which input was last changing...
by amatt
Thu Apr 09, 2020 6:30 pm
Forum: FreeEMS Vehicles
Topic: Ahmad's 1994 Proton Wira (44th)
Replies: 24
Views: 99520

Re: Libreems to Freeems migration.

Ok, let me try another shoot. Just load this http://builds.freeems.org/firmware/mast ... nd2.s19.gz alone or need to add other s19? I dont know how to explain, but rpm seen jumping around, Dockwidget is rapidly green,red,green,red... What is minimum require sensor input needed? Iat I hook 1k resisto...