DIYEFI.org Forum

Alright, will do! Yeah I figured it's probably about time I wrap up this thread and move to the technical part of the forum. I have a lot of stuff to handle and a lot of things to talk about. Right now I'm still figuring out a trans controller.

Okay, here's a little more info about the 5.9 Magnum. The stock crank sensor is an 8 tooth, and the cam position sensor measures a every time cylinder 1 is at TDC, and the 8 tooth CPS tells every time another cylinder is at TDC, since the cam sensor tells where cylinder 1 is. Would it be better to h...

Little 1-2 test if anyone's wondering. The tach isn't accurate, don't pay attention to it, the shifts are too fast for it to really register how fast the motor is decelerating. The squeak during the shift is my accessory belt.

https://www.youtube.com/watch?v=Jg2fg2ryN84

Transmission is rebuilt, running fantastically, chirping the tires and squeaking the accessory belt during a WOT 1-2 shift. EXTREMELY quick shifting. It's doing wonderful. Now, time to design a controller for it. Figured I should give you guys an update. Looks like stuff has been going on over here ...

Is it more of a software problem than a hardware limitation?

Excuse me, since I don't have a particularly refined knowledge of this kind of stuff, but I have an idea. What exactly is limiting us from sequential ignition/injection? Why are we trying to limit ourselves to using just one chip instead of using accessory chips to take care of the problem we have r...

Will do!

Well here's the thing, I'm gonna get it running in the simplest way possible before I start experimenting and dicking around with it. So if FreeEMS can support a high amount of boost on a big V8, I'm in. Heck yes, I'd love to be another success story. It's gonna take me a while though, but you'll he...

Those are factory replacements for stock EDIS coils. I've heard of people using them on 1700hp big blocks. I don't see why they wouldn't work. Yes, I'm a newbie to this stuff. But, I don't see how multi-shot batch wouldn't offer an advantage. Obviously I'd get it set up with batch first and then go ...

So from what you told me, I could do the following: Wasted spark, with four coils. Batch injection tuning for 2 channels, where the signal from FreeEMS will go to the arduino to split up those batch signals into full sequential (so full sequential injection but control is only adjustable for two ban...