DIYEFI.org Forum

Status as per yesterday evening

Todolist: mount the pcb and the small map pcb securly in place, mount the CEL somewhere in eye sight, double check everything and hook it up

It is a pleasure to read your progress posts

You are a hero

edit: funny how much the smiley looks like a capacitor

Most of the green wires are switched 12+ (except the one in the top left corner, that is RPM in from the VR sensor)
The red wires on the outputs are drain wires on the mosfets, the blacks are the power-grounds (source).

Thank you sir. When I got the engine running I'm going to hotglue all the small wires to the board to prevent them from breaking off because of vibrations

VR sensor tested in circuit:
http://www.youtube.com/watch?v=bNTKdQvk66E&hd=1

Tested all outputs again after some wire adjustments:
http://www.youtube.com/watch?v=xLnZ9YJRW0E&hd=1

Only the MAP is left now

Static overview:

http://www.youtube.com/watch?v=BE85-lzEOfE&hd=1
Benchtest is running
Only need to build the VR input and MAP now hardware wise and then put it all in a decent casing

Only got the MAP and VR input left, but I'm going to test all the inputs/outputs first now.
After the testing I'm going to connect all the wires to the Motronic 55 pin connector to regain some structure in the view...

Some progress, added more input filters and Fuel Pomp relay output and the 4 injector output:

I've got a problem using the FreeLoader app. http://issues.freeems.org/view.php?id=866

Pulled out all of my hair allready and am about to start on someone elses...