DIYEFI.org Forum

Had a reasonably productive evening in the shed. R33 now has subframe locking spacers/disks fitted. Also cracked the diff drain bung to make room for some fresh synthetic oil. It can sit for a day or two to let all the old stuff leave. Going to have to acquire and/or rig up some kind of bottle and h...

Nice work fellas! Great results. Thanks for sharing the vids.

Love the style and especially that keg, haha.

I've had the most luck with the straight variety. The parallel/non-tapered ones seem to work the best but you need to drill the hole well for the size of the minor diameter.

Things people tried to teach me as an apprentice before I became a desk jockey: Drill out the top thread of the hole: This tends to get damaged by the shoulder of the stud when it is tightened down. If you remove them then it takes less torque to turn the stud and is less likely to strip your easy-o...

The R33 has been hibernating since the start of the year. About a month ago I did a minor update to the decoder firmware and couldn't get it to fire up. Suspecting the firmware causing the decoder offset to be wrong I hooked up the timing light and left it until the other day (neglect!). With a trus...

Welcome back!

R33 is about 900x140

Gave it a fang and got this: rob@rob-Satellite-L300:~/Projects/RobRB25$ python ../haruspex/haruspex.py src/main/data/tables/axis/FredsTruck-Load.h src/main/data/tables/axis/FredsTruck-RPM.h src/main/data/tables/ve/RobRB25VE.h src/main/data/tables/lambda/RobRB25Lambda.h ~/ULV/2015.09.19-21.29.30.bin-...

Lubuntu Xenial required:

sudo apt-get install python-matplotlib python-parse python-seaborn

Congrats Fred.
KP FAIL success! Thanks for having me along on the trip.
Fun little car with an exciting future ahead.